IBM XSERIES 220 manual Removing the front door and bezel assembly

7.Remove the front door and bezel assembly.

a.Grasp the end of the blue bezel-release lever inside of the system; then, move the lever forward to release the front door and bezel assembly.

Figure 3. Removing the front door and bezel assembly

b.Swing the assembly away from the front of the system; then, lift the front door and bezel assembly out of the tab openings on the bottom of the system and store the assembly for possible future use.

8.Carefully turn the system open-side up on a flat surface; then, remove the four feet from the system.

a.If the front feet on the system do not already face outward, rotate them as shown below:

44Hardware Maintenance Manual: xSeries 220