IBM XSERIES 220 Error Code/Symptom FRU/Action 185 Run Configuration/Setup, 201, Microprocessor

Error Code/Symptom		FRU/Action
185	1.	Run Configuration/Setup
(Drive startup sequence	2.	System Board
information corrupted)
186	1.	Run Configuration/Setup
(Security hardware control	2.	System Board
logic failed)
187	1.	Set serial number in Setup
(VPD serial number not set.)	2.	System Board
188	1.	Run Configuration/Setup
(Bad EEPROM CRC #2)	2.	System Board
189	1.	Run Configuration/Setup, enter the administrator password
(Three attempts were made to	2.	System Board.
access the server with invalid
passwords)
201	1.	Run memory diagnostics.
(Memory test error, see	2.	DIMM
"Memory Settings" on page
	3.	System Board
32.) If the server does not
have the latest level of BIOS
installed, update the BIOS to
the latest level and run the
diagnostic program again.
229	1.	Microprocessor
(Cache error)	2.	Optional microprocessor (if installed)
289	1.	Run Configuration/Setup, if disabled by user
(DIMM has been disabled by	2.	Disabled DIMM, if not disabled by user.
user or system, see "Memory
Settings" on page 32.)
301	1.	Keyboard
(Keyboard or keyboard	2.	System Board
controller error)
303	1.	System Board
(Keyboard controller error)	2.	Keyboard
602	1.	Diskette
(Invalid diskette boot record)	2.	Diskette Drive
	3.	Cable
	4.	System Board
604	1.	Run Configuration/Setup and Diagnostics
(Diskette drive error)	2.	Diskette Drive
	3.	Drive Cable
	4.	System Board
662	1.	Run Configuration/Setup and Diagnostics
(Diskette drive configuration	2.	Diskette Drive
error)
	3.	Drive Cable
	4.	System Board

Symptom-to-FRU index 121