IBM XSERIES 220 Error Code/Symptom FRU/Action XXX-S99, Adapter, 035-253-S99, Power Supply, Cable

Error Code/Symptom			FRU/Action
035-XXX-S99	(Failed	1.	Adapter
RAID test on PCI slot S. S =		2.	SCSI Backplane
number of failing PCI slot.
		3.	Cable
Check System Error Log
before replacing a FRU.)
035-XXX-SNN (Check		1.	Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S.
System Error Log before
replacing a FRU.	S =
number of failing PCI slot;
NN = SCSI ID of failing fixed
disk.)
035-253-S99	(RAID	1.	ServeRAID Adapter in slot S is not configured properly. Obtain the basic and
adapter initialization failure)			extended configuration status and refer to the ServeRAID Hardware Maintenance
			Manual for more information.
		2.	Cable
		3.	Adapter
075-XXX-000	(Failed	1.	Power Supply
Power Supply test)
089-XXX-001	(Failed	1.	Microprocessor
Microprocessor test)
089-XXX-002		1.	Optional Microprocessor 2
(Failed Optional
Microprocessor test)
180-XXX-003	(Failed	1.	System Board
System Board LED test)
201-XXX-0NN	(Failed	1.	DIMM Location J1-J4
Memory test, see "Memory		2.	Memory card
Settings" on page 32.) NN =
DIMM location.
201-XXX-999 (Multiple		1.	See error text for failing DIMMs
DIMM failure, see error text.)
202-XXX-001	(Failed	1.	Microprocessor CPU 1
System Cache test)
202-XXX-002	(Failed	1.	Microprocessor CPU 2
System Cache test)
206-XXX-000	(Failed	1.	Cable
Diskette Drive test)		2.	Diskette Drive
		3.	System Board
215-XXX-000	(Failed	1.	CD-ROM Drive Cables
IDE CD-ROM test)		2. CD-ROM Drive
		3.	System Board
217-XXX-000	(Failed	1.	Fixed Disk 1
BIOS Fixed Disk test)
Note: If RAID is
configured, the fixed
disk number refers to
the RAID logical
array.

116Hardware Maintenance Manual: xSeries 220