1.Read “Before you begin” on page 58 and the documentation that comes with your options.
2.Be sure the server and all attached devices are turned off.
3.Follow the instructions that come with the option to prepare it for installation and to connect it to the server.
Note: If you are attaching a SCSI device, see “SCSI port” on page 91 for SCSI ID and cabling information.
I/O connector locations
The following illustration shows the input/output connectors (ports) and the expansion slots on the system board. For pin assignments and other details about these connectors, see “Input/Output ports”.
Keyboard/mouse
USB
Serial A
Parallel
Serial B
Ethernet
Video
Input/Output ports
This section provides information about the input/output (I/O) ports on the server. These ports include the following:
•One parallel port
•One video port
•One keyboard port
•One auxiliary
•Two serial ports
•Two Universal Serial Bus (USB) ports
•One Ethernet port
•One communication connector dedicated to the system management adapter
Notes:
1.You can set an administrator password through the Configuration/Setup Utility program only if the optional system management adapter is installed in the server.
