5.Install the microprocessor:
a.Touch the
b.Orient the microprocessor over the microprocessor connector, as shown in the following illustration. Carefully press the microprocessor into the connector.
Microprocessor 2 connector
Terminator card
Microprocessor 2
Lever
Microprocessor orientation indicator
Attention: To avoid bending the pins, do not use excessive force when pressing the microprocessor into the connector.
6.Push the release lever down to lock the microprocessor into place.
7.If you are installing a microprocessor that has a speed of 933 MHz or higher, continue with step 9 on page 81.
If you are installing a microprocessor that has a speed lower than 933 MHz, continue with step 8 on page 80.
