Miller Electric C-Series manual Specifications Subject to change without notice

Specifications (Subject to change without notice.)

Part No.	Gun Model	Cable Length	Rated Output	Duty Cycle	Standard Wire Size	Weight
#194 751	C-3010	10 ft (3.0 m)	300 Amps	100% using CO2 (ratings with	.035 – .045 in	5.6 lb (2.5 kg)
#194 752	C-3012	12 ft (3.7 m)		mixed gas are reduced by 10 – 50%	(0.9 – 1.2 mm)	6.4 lb (2.9 kg)
#194 753	C-3015	15 ft (4.6 m)		depending on the gas mixture and		7.5 lb (3.4 kg)
				welding parameters)
#194 754	C-4010	10 ft (3.0 m)	400 Amps		.035 – .045 in	7.5 lb (3.4 kg)
#194 755	C-4012	12 ft (3.7 m)			(0.9 – 1.2 mm)	8.6 lb (3.9 kg)
#194 756	C-4015	15 ft (4.6 m)				10.3 lb (4.7 kg)
#194 757	C-5010	10 ft (3.0 m)	500 Amps		.052 – 1/16 in	9.3 lb (4.2 kg)
#194 758	C-5012	12 ft (3.7 m)			(1.3 – 1.6 mm)	10.8 lb (4.9 kg)
#194 759	C-5015	15 ft (4.6 m)				13.0 lb (5.9 kg)
#194 760	C-6010	10 ft (3.0 m)	600 Amps		.052 – 1/16 in	10.3 lb (4.7 kg)
#194 761	C-6012	12 ft (3.7 m)			(1.3 – 1.6 mm)	12.0 lb (5.4 kg)
#194 762	C-6015	15 ft (4.6 m)				14.5 lb (6.6 kg)

Genuine Miller Options (Order from Miller Service Parts.)

Locking Trigger Switch #199 661

Allows trigger to be locked during long welds.

Gun Hook #199 662

Enables gun to be stored between welds.

Aluminum Conversion Kit #202 895

Steel wrapped nylon liner allows 10 ft Roughneck® welding guns to feed 3/64 – 1/16 in (1.2 – 1.6 mm) aluminum wire.

Miller Roughneck Consumable Upgrade Kits for Tweco® Guns 300/400/500 Amp #214 893

Includes gas diffuser and neck insulator. Upgrades a Tweco gun for use with patented Miller FasTip™ contact tips. (Order FasTip contact tips separately.)

Tweco is a registered trademark of Thermadyne.

Heat Shields
300/400 Amp	#213 229
500/600 Amp	#213 230

Machine Adapter Kit #199 663

Allows Roughneck welding guns to adapt to Hobart and Thermal Arc products (BETAMIG II, 200, 250, 251; Hefty; 2000 Series; Dual/Digital 2000; Porta-Feed and Ultra-Feed), Lincoln products (Power MIG 255; Wirematic 250, 255; SP-T Series; Power Feed 10; DH-10; LN-10 (new style) and STT-10) and ESAB products (Migmaster 180). Tweco style 5/8 in direct plug. Requires ordering a new replacement liner.

Machine Adapter Kit #199 664

Allows Roughneck welding guns to adapt to Lincoln products (LN-7, LN-8, LN-9, LN-22, LN-25 and LN-742). Requires ordering a new replacement liner.

DSS-8 #079 693

A 15 ft 2-position (dual pull) trigger switch that attaches to the gun handle and is used in place of the standard trigger for dual scheduling.

Adapter cord #157 364 is required to use the DSS-8 with 60M wire feeders.

DSS-9 #071 833

A 15 ft 2-position slide switch that attaches to the gun handle and is used to select the desired welding condition for dual scheduling. Gun trigger operates as standard trigger. Adapter cord #157 364 is required to use the DSS-9 with 60M wire feeders.

DSS-9M #041 793

A 15 ft 2-position slide switch that attaches to the gun handle and is used to select the desired welding condition for dual scheduling with the 60M wire feeder. Gun trigger operates as standard trigger.

2