Miller Electric Deltaweld Series manual Packages, Option #1 Delta-FabSystem

Genuine Miller Options

Digital Meter #186 498 Field Dual-function,back-lit LCD digital meter with selector switch. The digital meter allows the wire feed speed to be preset in meters per minute or inches per minute. The voltage function will only monitor and display the arc voltage. The voltage display can also be calibrated if required.

Preflow/Postflow and Spot Control #186 496 Field

Installs inside feeder under an easy access hinged cover. Provides up to 5 seconds of spot weld time and has adjustable timers (0.25 to 5 sec.) for controlling gas flow prior to arc initiation and after completion of weld.

Packages

NEW! MIG Power Source Solutions

Option #1: Delta-Fab™System

Purchase running gear and MIG kit separately.

Delta-Fab™System

#951 022 (230/460/575 V, 60 Hz)

Comes complete With:

Delta-Fab™power source

24A wire feeder Bernard® Q-Gun™

Option #2: Delta-Fab™System Stationary Package

Stationary display without running gear/cylinder rack.

Delta-Fab™System Stationary Package

#951 083 (230/460/575 V, 60 Hz)

Comes complete With:

Delta-Fab™power source

24A wire feeder

Bernard® Q-Gun™

Industrial MIG 4/0 Kit:

Smith® regulator/flowmeter with 10 ft (3 m) gas hose, 10 ft (3 m) 4/0 feeder weld cable with lugs, and 15 ft (4.6 m) work cable with 600-amp C-clamp

Option #3: Delta-Fab™System MIGRunner® Package

MIGRunner system with factory-installed running gear/cylinder rack.

Delta-Fab™System MIGRunner Package

#951 111 (230/460/575 V, 60 Hz)

Comes complete With:

Delta-Fab™power source

24A wire feeder

Bernard® Q-Gun™

Industrial MIG 4/0 Kit:

Smith® regulator/flowmeter with 10 ft (3 m) gas hose, 10 ft (3 m) 4/0 feeder weld cable with lugs, and 15 ft (4.6 m) work cable with 600-amp C-clamp Factory installed running gear/cylinder rack

3