Miller Electric Deltaweld Series manual MIG Welding Power Source, Delta-Fab, 24A Wire Feeder

Delta-Fab System

Issued April 2008 • Index No. DC/15

MIG Welding

Power Source

Quick Specs

Industrial Applications

Heavy-to-Light Fabrication

Processes

MIG (GMAW)

with mild steel, flux cored, stainless steel, and aluminum wires

Delta-Fab

Input Power 3-Phase, 230/460/575 V

Rated Output

375 A at 100% Duty Cycle

450 A at 60% Duty Cycle

Voltage 10 – 45 V

Weight 374 lb (170 kg)

24A Wire Feeder

Input Power 24 VAC / 7 A

Electrode Wire Diameter Capacity

.023– 3/32 in (0.08 – 2.4 mm)

Wire Speed 75 – 750 IPM (1.9 – 16.5 m/min)

Remote Voltage Control Standard

Weight 40 lb (18 kg)

The Power of Blue®.

NEW! MIG Power Source Solutions

Run-in standard on 24A for better arc-starting performance on a variety of wires.

Material specific output studs provide the flexibility to produce the optimal arc characteristics for aluminum, stainless steel and all other materials.

Line voltage compensation keeps welding parameters constant even when input voltages change ±10%. Eliminates need to change welding parameters throughout the day.

Remote voltage control is standard. Parameter adjustments can be made in weld cell or at a remote location.

See option and package descriptions on page 3.

Four-Drive-Roll feeding system with independent tension control handles small and large diameter wires. (Drive rolls and guides ordered separately.)

Large analog volt and ammeters for

easy viewing.

14-pin receptacle provides quick, direct connection to wire feeders and accessories.

Auto Remote Sense™ automatically selects remote control requirements through the 14-pin receptacle.

Eliminates switches and confusion for the operator.

Solid-state weld contactor provides longevity to match the ultra-durable and reliable reputation of the Delta-Fab.

Large output voltage range provides more flexibility on a variety of wire diameters. Also aids operator with voltage losses that occur when operating long distances from power source.

14-pin select is easy to set up with no external switches to put in the wrong position.

Thermal overload protection automatically shuts down the system to prevent high repair costs.

115 VAC duplex receptacle provides

15 amps of auxiliary power.

Delta-Fab™System

MIGRunner® Package shown

Welder is warranted for 3 years, parts and labor.

Original main power rectified parts are warranted for 5 years.

Miller Electric Mfg. Co.	International Headquarters	Web Site
An Illinois Tool Works Company	Phone: 920-735-4505	www.MillerWelds.com
1635 West Spencer Street	USA FAX: 920-735-4134
Appleton, WI 54914 USA	Canadian FAX: 920-735-4169
	International FAX: 920-735-4125