Miller Electric SW3 Tongs Tips Included, in No Morse Taper, Tips Quantity Where Used

Tongs and Tips (Must be ordered separately from spot welders. One pair of tips are supplied with each set of tongs.)

								TONG LENGTH
						TONGS		6 in	12 in	18 in	TIPS INCLUDED
								(150 mm)	(304 mm)	(457 mm)
							STANDARD 90°	#040 218	#040 219	#040 220	#040 223
4-1/4 in					6-1/4 in No. 1 Morse Taper
(108 mm)					(159 mm)		No. 2 Morse Taper	—	—	#041 001	#040 308
							STANDARD 45°
4-1/4 in					6-1/4 in		No. 1 Morse Taper	—	#041 004	#041 005	#040 851
(108 mm)					(159 mm)		No. 2 Morse Taper	—	—	#040 296	#040 225
		X					TT-6W	—	—	#041 838	#040 308
7-1/2 in
							No. 2 Morse Taper
(190 mm)
				X			TT-9W	—	—	#041 840	#040 308
			9 in
							No. 2 Morse Taper
	(229 mm)

Notes for tongs and tips:

Tongs and tips shown to the left can be used with all PSW and SSW model spot welders. Recommended max. tong length is 18 in (457 mm).

Tong throat-height dimension for standard 90° and 45° tongs is 4-1/4 in (108 mm). Throat length is measured from the center of the spot tips to the front water hose connection. X = tong length.

One set of tips is supplied with each set of tongs.

Tips are made of RWMA Class 2 alloy.

Maximum welding capabilities are obtained with minimum tong length.

MT = Morse Taper.

No. 1 Morse Taper has smaller diameter than No. 2 Morse Taper.

					TIPS	QUANTITY	WHERE USED
					No. 1 MT (Pointed)	2 tips	Standard No. 1 Tongs, 90°
#040 223
					No. 1 MT (Offset)	2 tips	Standard No. 1 Tongs, 90°
		#040 224
					No. 2 MT (Pointed)		Standard No. 2 Tongs, 90°
						2 tips	TT-6W Tongs
#040 308							TT-9W Tongs
					No. 1 MT (Offset)	2 tips	Standard No. 1 Tongs, 45°
			#040 851
					No. 1 MT (Offset)	2 tips	Standard No. 1 Tongs, 90°
#040 226
					No. 1 MT (Offset)	2 tips	Standard No. 1 Tongs, 90°
#040 298
					No. 2 MT (Offset)	2 tips	Standard No. 2 Tongs, 45°
	#040 225
					No. 1 MT (Flat Swivel Tip)	2 tips	Standard No. 1 Tongs, 90°
					Matching Pointed Tip
					#040 216
					Adapter (adapts No. 1 Morse Taper Tip	2 adapters	Standard No. 2 Tongs, 90°
					to No. 2 receptacle)		TT-6W Tongs (top)
				#040 227			TT-9W Tongs (top)

3