Typical Installations

Stationary Resistance Spot

Order tongs and tips separately.

Input power cord of proper size per NEC and local codes.

Coolant source and two coolant hoses (5/16 ID). Hoses must be compatible with coolant.

Note: Oxy-acetylene hoses are not compatible with ethylene glycol.

Air hoses.

Air in

Equipment and Options	Stock No.	Description	Qty.	Price
SSW-2020 ATT	#903 826	Stationary, air-operated, 230 VAC, 50/60 Hz

SSW-2040 ATT	#903 827	Stationary, air-operated, 460 VAC, 50/60 Hz

Tongs
Order separately		Ordered by the pair. One pair of tips included with each pair of tongs.
		See page 3 for tong/tip combinations

Tips
Order spares or additional types		One pair of tips included with each pair of tongs.
		See page 3 for tips that can be ordered in pairs or individually

Accessories
Tip Dresser	#040 228

Coolant Systems
Coolmate™ 3	#043 007	115 VAC 5/8-18 left-hand inlet/outlet receptacles
	#043 008	230 VAC 5/8-18 left-hand inlet/outlet receptacles
Coolmate™ V3	#043 009	115 VAC 5/8-18 left-hand inlet/outlet receptacles
Coolmate™ 4	#042 288	115 VAC 5/8-18 left-hand inlet/outlet receptacles
Coolant Solution
Low Conductivity	#043 809	Case of four—1 gallon bottles
Aluminum Protecting	#043 810	Case of four—1 gallon bottles

Miscellaneous
Coolant Hoses		One coolant “out” and one coolant “in” hose required. One end 5/8-18
		left-hand male fitting and the other end “slip-on” secured with hose clamp.
		5/16 ID hoses must be compatible with coolant.
Air Hoses		Air supply to air filter to back of controller.
		Air Filter has 1/4 in pipe thread female fittings.
		Controller has 5/8-18 left-hand thread female fittings.
Input Power Cord		To be supplied by local source to meet local electrical codes and guidelines.

Date:		Total Quoted Price:

Distributed by:

Litho in USA