Milwaukee 1/1/1854, 1/1/2404 manual Specific Safety Rules, Functionaldescription

SPECIFIC SAFETY RULES

1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of tool “live” and shock the operator.

2.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

3.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles.

Symbology

Underwriters Laboratories Inc.

Canadian Standards Association

Mexican Approvals Marking

Volts Direct Current or

Alternating Current

No Load Revolutions Per Minute

Amperes

Specifications

	Tool				Wood			Steel	Masonry
		No	Flat	Hole	Auger	Ship
	Volts	Load	Boring			Auger	Selfeed	Steel	Carbide
Cat. No.	AC/DC	RPM	Bits	Saws	Bits	Bits	Bits	Bit	Tip Bit
1854-1	120	350	1-1/2"	6"	1-1/2"	1-1/2"	4-5/8"	3/4"	1-1/2"
2404-1*	120	250	1-1/2"	6"	1-1/2"	1-1/2"	4-5/8"	1-1/4"	1-1/2"

*To adapt a 3/4" capacity chuck to Cat. No. 2404-1 drill with No. 3 Internal Morse Taper Socket specify Chuck Kit No. 49-22-1550. Kit consists of Chuck No.

48-66-2000 and Arbor No. 48-07-0100.

FUNCTIONALDESCRIPTION

	10
9	10	1		10
					1.	Pipe handle
		2		1	2.	Chuck
				9		(Cat. No. 1854-1)
			10
				3	3.	Morse Taper Socket

8

	8			(Cat. No. 2404-1)
			4.	Reversing switch
7
			5.	Trigger switch
	7		6.	Switch handle
			7.	Motor housing
	5	4	8.	Nameplate
10
	10		9.	Spade handle
			5	Insulated gripping surfaces
6	4		10.
	6

page 3