•When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery termi- nals together may cause burns or a fire.
•Under abusive conditions, liquid may be eject- ed from the battery; avoid contact. If contact accidentally occurs, f ush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
SERVICE
•Have your power tool serviced by a quali f ed repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
FUNCTIONAL DESCRIPTION
1 | 2 | 3 | 4 |
|
|
| 5 |
1. | Bit holder collar |
| 6 |
2. | Clutch adjusting ring |
| |
3. | Speed selector |
|
|
4. | Lock switch |
|
|
5. | Fuel Gauge |
|
|
6. | Forward/reverse switch |
|
|
OPERATION | Using the Lock Switch |
| |
| When the battery is installed, the tool is in operat- | ||
WARNING Always remove battery | ing condition. The lock switch prevents accidental | ||
starting by locking the forward/reverse switch. Al- | |||
pack before changing or removing ac- | ways set the lock switch to “lock” before performing | ||
cessories. Only use accessories specif cally | maintenance, changing accessories, | Unlock | |
recommended for this tool. Others may be | storing the tool and any time the tool | ||
hazardous. | is not in use. |
|
|
| 1. To lock, push the lock switch to |
| |
WARNING To reduce the risk of injury, | display the lock | symbol. | Lock |
2. To unlock, push the lock switch to | |||
wear safety goggles or glasses with side- | display the unlock | symbol. |
|
shields. |
|
|
|
Installing Bits | Selecting High or Low Speed |
|
| |
1. For low speed and more torque, | HI | LO | ||
Always remove the battery before inserting or | ||||
removing bits. Select the proper style and size bit | push the speed selector back ("1" |
|
| |
is displayed). |
|
| ||
for the type of screw you are using. |
|
| ||
2. For high speed and less torque, |
|
| ||
1. To installthe bit, pull out the collar. Press the bit |
|
| ||
into the socket until the collar snaps back and | push the speed selector forward |
|
|
•Hold power tool by insulated gripping sur- faces, when performing an operation where the fastener may contact hidden wiring.Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
•Keep hands away from all cutting edges and moving parts.
•Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
•WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other
masonry products, and
•arsenic and chromium from
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are spe- cially designed to filter out microscopic particles.
SYMBOLOGY
Direct Current
Volts
No Load Revolutions per Minute (RPM)
Underwriters Laboratories, Inc.
United States and Canada
4
SPECIFICATIONS
Cat. No. | Volts DC | No Load RPM |
4 | Low 200 | |
|
| High 600 |
ASSEMBLY
WARNING Recharge only with the charger specified for the battery . For specific charging instructions, read the operator’s manual supplied with your charger and battery.
Inserting the Battery into the Tool
Slot
Tab 
1
Lock
2
Line
Line up the tabs on the battery with the slots in the tool opening. Slide the battery all the way into the tool. Turn the battery clockwise to lock it in place. The line on the battery will line up with the on the tool. The tool will not run if the battery is not properly locked into the tool.
Removing the Battery from the Tool
Turn the battery cap counterclockwise to unlock. Pull the battery out of the tool.
Checking the Fuel Gauge
To determine the amount of charge left in the bat- tery, press the forward/reverse switch. The Fuel Gauge will light up for
the bit is locked into place. | ("2" is displayed). | |
2. To remove the bit, pull out the collar, then pull | Selecting Forward or Reverse | |
out the bit. | Press and hold the top of the switch ◄ for forward | |
NOTE: It is not necessary to hold the collar out | ||
when installing and removing bits. | rotation, and the bottom of the switch ►for reverse | |
rotation. The switch will automatically return to the | ||
Adjusting the Handle | ||
center OFF position when it is released. | ||
The handle is designed for convenience and con- | Automatic | |
trol. The durable, center pivot allows the handle to | ||
be used in the conventional shape or folded into a | To prevent extra driving force after the selected | |
pistol grip.Access to the forward/reverse switch and | torque has been reached, the tool will automatically | |
lock switch is comfortable in either handle position. | shut off if the clutch slips. At higher clutch settings, | |
Using the Adjustable Clutch | this feature may not immediately engage. Release | |
the switch to reset the automatic | ||
This tool has an adjustable clutch | Cold Weather Operation | |
for driving different types of screws | ||
MILWAUKEE | ||
into different materials. When prop- | ||
signed to operate in temperatures below freezing. | ||
erly adjusted, the clutch will slip at | ||
When the battery pack is too cold, it may need to | ||
a preset torque to prevent driving | ||
warm up before normal use. Put the battery on a | ||
the screw too deep and to prevent Driving | ||
damage to the screw or tool. | tool and use the tool in a light application. It may | |
“buzz” for a short time until it warms up. When the | ||
To adjust the clutch, turn the clutch | ||
buzzing stops, use the tool normally. | ||
adjusting ring so that the desired | ||
|
| |
on the motor housing, as shown. Drilling |
|
The torque specifications shown here are ap- proximate values obtained with a fully charged battery pack.
Clutch | (in lbs) | Applications | ||
Setting | Lo | Hi | ||
| ||||
1 | 3.7 | 3.7 | Small screws in softwood. | |
4 | 6.5 | 6.5 | Medium screws in soft- | |
7 | 9.3 | 9.3 | wood or small screws in | |
hardwood. | ||||
10 | 12.8 | 11.2 | Large screws in soft- | |
13 | 16.4 | N/A | woods. Medium screws in | |
16 | 20.0 | N/A | hardwood or large screws | |
19 | 23.4 | N/A | in hardwood with pilot | |
hole. | ||||
*When set to high speed, set the clutch at 10 or below. The Automatic
NOTE: Because the settings shown in the table are only a guide, use a piece of scrap material to test the different clutch settings before driving screws into the workpiece.
5
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800)
