Milwaukee 5626-68 manual Specific Safety Rules Functional Description, Symbology, Specifications

SPECIFIC SAFETY RULES

FUNCTIONAL DESCRIPTION

1.	WARNING: Some dust created by
	power sanding, sawing, grinding, drill-
	ing, and other construction activities
	contains chemicals known to cause
	cancer, birth defects or other reproduc-
	tive harm. Some examples of these
	chemicals are:
•	lead from lead-based paint
•	crystalline silica from bricks and cement
	and other masonry
	products, and
•	arsenic and chromium from chemically-
	treated lumber.
	Your risk from these exposures varies,
	depending on how often you do this
	type of work. To reduce your exposure
	to these chemicals: work in a well ven-
	tilated area, and work with approved
	safety equipment, such as those dust
	masks that are specifically designed to
	filter out microscopic particles.
2.	Read, understand, and follow the
	instructions packaged with the router
	table and router lift. Do not plug in
	Remote Power until Router Table Motor
	is fully installed.
3.	Only use the following recommended
	router tables and router lifts with this
	motor.
	JessEm Mast-R-Lift #02101 with
	required Shim Kit #02116
	JessEm Mast-R-Lift #02102 with
	required Shim Kit #02116
	JessEm Mast-R-Lift Excel #02201 with

5.	Always wear safety goggles and dust
	mask. Use only in a well ventilated
	area. Using personal safety devices and
	in a safe environment reduce the risk for
	injury.
6.	Some woods contain preservatives
	that can be toxic. Take extra care to
	prevent inhalation and skin contact
	when working with these materials. Re-
	quest, and follow, any safety information
	available from your material supplier.
7.	Always make sure the workpiece is
	free from nails, screws and other for-
	eign objects. Keep the working edge
	away from the clamping surface.
	Cutting these objects can cause loss of
	control of the workpiece and damage to
	the bit.
8.	Never place hands near cutting sur-
	face.
9.	Never use dull or damaged bits.
	Sharp bits must be handled with
	care. Damaged bits can break during
	use. Dull bits require more force, which
	could cause the bit to break. Damaged
	bits can throw carbide pieces and burn
	the workpiece.
10.	After changing the bit or making any
	adjustments, make sure the collet nut
	and any other adjustment devices are
	securely tightened. Loose adjustment
	devices can unexpectedly shift, causing
	loss of control. Loose rotating compo-
	nents will be violently thrown. Watch for
	vibration or wobbling that could indicate
	an improperly installed bit.

12

3

5

Cat. No. 5626-68 *

4

1.Variable speed dial

2.Lock key

3.On/Off switch

4.Cord

5.Power box nameplate (on back)

6.Motor unit nameplate (on back)

7.Motor

8.Collet assembly

8

7

6

*Consists of 5626-69 motor and 23-37-0175 power box.

required Shim Kit #02116.

Using tables and lifts that are not spe-

cifically recommended may not prop-

erly secure the Router Table Motor with

Remote Power. An improperly secured

Motor increases the risk of injury or

product damage.

4. Do not place motor in a router base

or hold motor by hand during use.

Motor is designed only for use properly

secured in a recommended JessEm

router lift or router table. This motor is

not designed for use in a MILWAUKEE

router base. Do not use this motor un-

less it is securely installed into a recom-

mended JessEm router lift and router

table.

11.	Always keep the power supply cord
	away from moving parts on the tool.
12.	Never start the tool when the bit is in
	contact with the material. The bit cut-
	ting edge may grab the material causing
	loss of control of the workpiece.
13.	Never touch the bit during or imme-
	diately after use. After use the bit may
	be hot enough to burn bare skin.
14.	To reduce the risk of injury, avoid
	“climb cutting.” Climb cutting can
	cause the workpiece to be thrown
	violently out of your control. Even small
	router bits can result in climb cutting.
	Always feed the workpiece against the
	cutter rotation.

4

Symbology

Double Insulated

Volts Alternating Current

No Load Revolutions per Minute (RPM)

Amperes

Do not expose to rain or use in damp locations.

Specifications

Motor	Volts	Amps	No Load
Cat. No.	AC		RPM
5626-69	120	15	10,000 -22,000

For use with:

JessEm Mast-R-Lift™ #02101 with required Shim Kit #02116

JessEm Mast-R-Lift™ #02102 with required Shim Kit #02116

JessEm Mast-R-Lift™ Excel #02201 with required Shim Kit #02116

5