SPECIFIC SAFETY RULES — SAWZALLS®
1.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2.Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
3.Keep hands away from all cutting edges and moving parts.
4.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
5.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
Volts Alternating Current
Amps
No Load Strokes per Minute (RPM)
Specifications
Catalog | Volts | Length of | Strokes |
Number | AC Only | Stroke | per Minute |
|
|
|
|
120 | |||
|
|
|
|
FUNCTIONALDESCRIPTION
21
1.Handle
2.Trigger
3.Nameplate
4. Blade Clamp | 3 |
5.Blade
6. Adjustable Pivot Shoe | 11 |
|
7.Shoe Release Lever
8. Hex Key (Select Models) | 10 |
|
9.Insulating Boot
10.Speed Control Dial
11. | 4 | 9 |
(Select Models) |
|
|
| 5 | 8 |
|
| 7 |
|
| 6 |
page 3
