Milwaukee 9075-20 Functional Description, Cat. No, 9070-20 9072-20 9072-22 9092-20 9096-20

FUNCTIONAL DESCRIPTION

1.Drive shank

2.Forward/reverse switch

(Cat. No. 9072-20, 9072-22, 9092-20, 9096-20)

3.	Trigger	1
	(Cat. No. 9072-20, 9072-22, 9092-20, 9096-20)
	Rocker switch (Cat. No. 9070-20, 9071-20, 9075-20)
4.	Speed control dial		2		Cat. No. 9072-20
	(Cat. No. 9072-20, 9072-22, 9092-20, 9096-20)
					9072-22
5.	Quik-Lok® cord (Cat. No. 9072-20, 9072-22, 9092-20, 9096-20)			3
6.	Quick change chuck (Cat. No. 9092-20, 9096-20)				4

7.Tool hanger (Cat. No. 9092-20, 9096-20)

8.Tool hanger ring (Cat. No. 9092-20, 9096-20)

Cat. No. 9092-20 8 5

7

6

Cat. No. 9075-20

3

Symbology

Double Insulated

Volts Alternating Current/

Direct Current

Volts Alternating Current

Amperes

Impacts per Minute

Under Load (IPM)

Underwriters

Laboratories, Inc.

Canadian

Standards Association

Mexican Approvals

Marking

Specifications

Cat.			No Load	Drive	Impacts Per	Average Torque
No.	Volts	A	RPM	Shank	Minute	Output
9070-20	120 AC/DC	7	1800	1/2"	2600	300 ft-lbs.
9071-20	120 AC/DC	7	1800	1/2"	2600	300 ft-lbs.
9072-20	120 AC Only	7	600-1800	1/2"	1000-2600	100-300 ft-lbs.
9072-22	120 AC Only	7	600-1800	1/2"	1000-2600	100-300 ft-lbs.
9075-20	120 AC/DC	7	1750	3/4"	2500	380 ft-lbs.
9092-20	120 AC Only	7	600-1800	7/16" Hex	1000-2600	100-315 ft-lbs.
9096-20	120 AC Only	7	600-1800	5/8" Hex	1000-2600	100-315 ft-lbs.

Quick Change Chuck Capacities*

Cat. No.	Quick Change Auger Bits	Selfeed Bits
9070-20	1-1/2"	2-9/16"
9072-20	1-1/2"	2-9/16"
9072-22	1-1/2"	2-9/16"
9092-20	1-1/2"	2-9/16"
9096-20	1-1/2"	2-9/16"

*Only for use with the 7/16" or 5/8" Hex Quick Change chuck, stan- dard equiptment on the 9092-20 (7/16") and 9096-20 (5/8"), optional accessory (Cat. No. 48-66-0061) on other models.

page 3