Minicom Advanced Systems CAT5 12. Operating the Smart KVM Extender, Shift, Adjusting the picture, The Receiver Control LED, The Transmitter Control LED

12. Operating the Smart KVM Extender

Once the system is connected there are 2 ways to switch between the 2 computers / KVM workstations.

•On the Receiver press the Select button

Or

•On the keyboard press Shift followed by + or -.

The Receiver Control LED

Status Meaning

	Off		User at Receiver working on Receiver computer
	On		User at Receiver working on Transmitter computer
	Blinking		User at Transmitter working on Transmitter computer
The Transmitter Control LED
		Status	Meaning
		Blinking	User at Receiver working on Transmitter computer
		Off	Any other situation

Adjusting the picture

When the Receiver has control of the Transmitter’s computer, adjust the picture quality where necessary using a small flat screwdriver to turn the Picture adjuster located on the Receiver’s rear panel. See Figure 6.

12