Connecting the Transmitter

Connect the Transmitter built-in cables to the computer as follows: Connect the purple Mouse connector to the computer’s mouse port. Connect the green Keyboard connector to the computer’s Keyboard port. Connect the blue Video connector to the computer’s Video card.

Connecting the CAT FTP System cable

Connect the CAT FTP System cable to the System ports of the 2 Smart extender units.

Connecting the Receiver

Connect a monitor, keyboard and mouse to the User ports on the Receiver’s rear panel.

7. Power supply

Connect the Receiver to the power supply with the Power adapter and Power cord provided. The Transmitter receives it power from the connected computer and does not generally need an external power supply. When cascading Extenders the Transmitter does need an external power supply. See page 19.

8.Using the Smart KVM Extender to give 2 users access to 1 computer

Connect the system as in Figure 9 to give 2 users access to 1 computer on a first- come-first-served basis. The connections are the same as in Figure 8, with the addition of a KVM workstation for user 2. Connect the workstation for user 2 as described below.

7