USER GUIDE
BOOTP - When selected, IP Link will contact a BOOTP (Bootstrap Protocol)
server in the local sub-net to obtain a valid IP address, gateway address and net
mask.
IP address
Static IP address in the usual dot notation.
Subnet mask
The net mask of the local network.
Gateway IP address
In case the IP Link should be accessible from networks other than the local one, this
IP address must be set to the local network router's IP address.
Primary DNS Server IP address
IP address of the primary Domain Name Server. This may be left empty, however IP
Link won't be able to perform name resolution.
Secondary DNS Server IP address
This address will be used in case the Primary DNS Server can't be contacted.
Primary Time Server
IP address of the primary NTP (Network Time Protocol) compliant timeserver. IP
Link will synchronize its own absolute time with the timeserver's one. This is
important for writing log entries and for the Dynamic DNS Service.
Secondary Time Server
This address will be used in case the Primary Time Server can't be contacted.
Remote Console & HTTPS port
Port number at which IP Link's Remote Console server and HTTPS server are
listening. If empty the default value of 443 is used.
HTTP port
Port number at which IP Link's HTTP server is listening. If empty the default value
of 80 is used.
TELNET port
Port number at which IP Link's Telnet server is listening. If empty the default value
of 23 is used.
24