Minolta 2330 - page 25

INSERTING THE BATTERIES

Close the battery-chamber door in the

direction of the arrow (1) and slide it

until it clicks (2).

* After replacing the batteries, check that the built-in clock (date and time) works correctly

(see page 116).

If neither AC adapter nor batteries are used more than 5 minutes, the built-in clock may

delay or be reset to the default setting.In this case, set the date and time again by

following the procedure described on page 116.

* Do not place the camera with the battery-chamber door facing down when the battery-

chamber door is open.Doing so, the battery-chamber door may be damaged.

* As the batteries become hot right after the camera is operated, be careful when

replacing the batteries.