i
CF911PE Operator’s Manual
To ensure optimum performance of the printer, follow the precautions listed below.
• Never place a heavy object on the printer.
• Never subject the printer to shocks.
• Never open any doors or turn the printer off while the printer is making prints.
• Never bring any magnetized object near the printer.
• Never use flammable sprays, liquids or gases near the printer.
• Never modify the printer, as a fire or electrical shock co uld result.
• Never remove any panel or cover which is secured. The prin ter contains high
voltage components which can cause electrical shock.
• Never tamper with the laser mechanism on laser-equip ped models, as blindness or
other injury may result.
• Never drop paper clips, staples or other small pieces of metal through the vents or
other openings in the printer, as a fire or electrical shock can res ult.
• Never place containers of liquid on the printer. If liquids get inside the printer, they
can cause fire or electrical shock. If a piece of metal or any liquid gets inside the
printer, immediately turn the printer off, unplug the power cord and call your
technical representative. A fire or electrical shoc k ca n result if the printer remains
plugged in or is operated after metal or liquid gets inside.
• Never leave the printer running if it becomes unusually hot, or if smoke or an
unusual odor or noise is detected. Should any of these conditions occur,
immediately turn the printer off, unplug the power cord and call yo ur te c hnical
representative. A fire or electrical shock can result if the printer remains plugged i n
under any of these conditions.
• Always insert the power plug all the way into the outle t.
• Always make sure that the outlet is visible, clear of the printe r or printer cabinet.
• Always provide good ventilation when making a large number of continuous prints.
• Never pull on the power cord, and always hold the plug whe n unplugging the power
cord. A damaged cord could result in a fire or cause an el ectrical shock.
• Never unplug the power cord with a wet hand, as it could cause an electrical shock.
• Always unplug the power cord before moving the printer. Moving the printer with
the power cord plugged in can damage the cord resulting in a fire or causing an
electrical shock.
• Always unplug the power cord when the printer is not going to be used for a long
time.
• Never place a heavy object on the power cord, or pull or bend it, as a fire or
electrical shock can result.
• Always ensure that the printer does not sit on or ride on the power cord or
communications cable of other electrical equi pm en t, as malfunctioning equipment
or a fire could result.
• Always ensure that the power cord or communications cable of other electri c al
equipment does not become wedged into the printer mechani sm, as malfunctioning
equipment or a fire could result.
Using the Printer Properly