The annotation screen with the selected main image is dis-

Annotation screen

played with a red area marquee. The subsequent audio track

 

 

 

 

 

 

is linked to the area in the marquee.

 

 

 

 

 

 

Use the left/right and up/down keys of the controller to move the area marquee.

:size :enter

Pressing the display button switches the marquee between the entire and local image areas.

:size :enter

Press the center of the controller to select the area. The audio stand-by screen is displayed.

In the stand-by screen, press the shutter-release button to begin recording. The frame counter displays the elapsed time; during the last ten seconds,

Press shutter button tothe counter will turn red and count down the time. The recording stops

record.

when the shutter-release button is pressed again or the remaining time has elapsed.

 

When making audio recordings, be careful not to touch or cover

Recording audio.

the microphone. For best results, hold the camera approximately

20cm (8in) from your mouth.

Press shutter button to stop.

The main image is displayed again. The yellow marquee indicates the previous marquee position. The red marquee is for the next linked audio track. Repeat the procedure to record subsequent tracks. The audio files are stored in WAV format on the memory card, but they do not appear in the main-image selection screen.

:size :enter

To exit the audio-annotation mode, press the center of the controller for one second. To return to the main-image selection screen, press the menu button.

12 FROM ANNOTATION TO MAILING