MN 325/MN 525 User’s Manual
Uninterruptible Power Supply (UPS)
15
Addendum
Installing PowerCenter on Windows XP (Home and Professional)
1) Click on Start and then click on Control Panel.
2) Double-click on Power Options then click on the UPS tab.
3) Set the manufacturer to None.
4) Exit to the desktop and shutdown your computer.
5) Turn the UPS off and unplug it.
6) Connect the serial interface cable to serial port on the UPS and an
open serial port on the back of the computer. (Note: You must
use the serial cable that was supplied with the unit).
7) Plug the UPS into an AC outlet, turn the UPS on and start your
computer.
8) Windows will find new hardware.
9) Insert the PowerCenter software disk into the floppy drive.
10) Follow the on-screen instructions
When the installation is completed, remove the floppy disk.