Minuteman UPS user manual Battery Replacement Procedure, PRO-E PRO500E PRO700E

English

CAUTION: Replace batteries with the same number and type as originally installed in the UPS. These batteries have pressure operated vents. These UPSs contain sealed non-spillable lead acid batteries.

PRO-E	PRO500E	PRO700E	PRO1100E	PRO1500E
Model #	PRO500iE	PRO700iE	PRO1100iE	PRO1500iE
Battery	1-12V9Ah	2-12V7Ah	3-12V7Ah	3-12V9Ah
Model #
Panasonic	LC-R129	LC-R127	LC-R127	LC-R129
Part #
Yuasa Part #	REW45-12	NP 7-12	NP 7-12	REW45-12

BATTERY REPLACEMENT PROCEDURE

PLEASE READ THE CAUTIONS AND WARNINGS BEFORE ATTEMPTING TO REPLACE THE BATTERIES

Hot-swappable batteries mean that the batteries can be replaced without powering down the whole UPS system.

NOTE: If there is a power interruption while replacing the hot-swappable batteries, with the UPS on, the load will not be backed up. To hot-swap the batteries start with step number 6.

1.Turn off the equipment that is plugged into the output receptacles of the UPS.

2.Press and release the On/Off/Test button on the front panel to turn the UPS OFF.

3.Unplug the UPS's AC power cord from the AC wall outlet.

4.Unplug the equipment from the output receptacles of the UPS.

5.Unplug the computer interface cable from the rear panel of the UPS.

6.Remove the retaining screws from the bottom of the front panel of the UPS.

7.Grasp the bottom of the front panel and gently pull the front panel off the UPS.

8.Lay the front panel on top of the UPS.

14