Minuteman UPS PRO-E user manual English

English

On-Line/On-Battery/Boost/Buck LED

Fault LED

Overload LED

Weak/Bad Battery LED

On/Off/Test Button

Press and release the ON/OFF/Test Button after 1 beep to turn the UPS ON or OFF (see section 4).

On-Line On-Battery Buck Boost

The On-Line/On-Battery/Boost and Buck (green) LED illuminates in a steady state when the UPS is on and supplying AC power to the load. The LED blinks and the audible alarm sounds, when supplying battery power to the load. The LED blinks and no audible alarm when the UPS is in either the boost or the buck mode.

The Fault (red) LED illuminates when the UPS has detected an inter- nal fault. (see section 5)

The Overload (yellow) LED illuminates when the loads connected to the UPS exceeds the UPS power rating. (see section 5)

The Weak/Bad Battery (red) LED illuminates when the UPS has detected that the batteries are Weak/Bad. Battery replacement might be required. (see section 5)

5