CONTROL BUTTONS
The digital control panel is located at the bottom of your color monitor. If you are not satisfied with the factory settings, use these controls to program those you prefer in each resolution. Then, these adjusted set- tings are kept in memory even if you change resolution or turn off the monitor.
BUTTON DESCRIPTION:
Power ON/OFF button
Use this button to turn the monitor on and off.
Power Indicator
This light glows green during normal operation and glows orange during power off. Glows orange and flash during power saving mode.
Menu Menu button
To push menu button turns on the menu, and it activates the items you highlight.
Select button
Use this button to move up and down the OSD selection menu and adjust the attribute of the monitor while in OSD mode.
The OSD menu activates automatically when you press the Menu button on the front of the monitor. The OSD remains centered on the screen while you make your adjustments. Use either the 
or 
select button to move the highlight to your selection. Pressing menu button the submenu will appear nearby main menu. The status bar indicates in which direction, from the factory preset, which adjustments
are being made. Use the 
or 
select button to adjust the control.
When you have finished making adjustments, press the menu button to save settings and exit back to main menu.
OSD-MENU DESCRIPTIONS
Main Menu
CONTRAST
Adjusts the black level of the display.
BRIGHTNESS
Adjusts the luminosity level of the display
Select this control to center the image horizontally on the screen.
Select this control to center the image vertically on the screen.
Select this control to expand or decrease the image width to horizontally fill the screen.
Select this control to adjust the image height to vertically fill the screen.
ROTATION
Rotates the image until the sides of the image are parallel to the edge of the bezel.
6 | 7 |
