MITEL
QUICK REFERENCE GUIDE
5606 Wireless Handset
1 Loudspeaker
2 Display
3 Mute Button
4 Soft Keys
5 OFF Button
6 Alphanumeric Keys
7 Microphone
8 Navigation Key
9 ON Button
10 Menu Soft key
11 Volume Up/Down Button
12 LED
13 Alarm Button (optional)
Turning the Handset On/Off
To turn on:
1.Press and hold the ON button. “Switch on?” is displayed.
2.Press Yes within 10 seconds.
To turn off:
1.Press and hold the OFF button.
2.Select Yes and press OK.
Making a Call
•Dial the number and then press the ON button. The name of the called party is displayed if available.
OR
•Press the Navigation Key down arrow to open the call list and use the Navigation key to scroll the list of your last twenty calls. Press the ON button to dial.
OR
1. In the Contacts menu, select Central |
Phonebook and the press the Right |
Placing a call on Hold
•Press the R softkey to place a call on Hold. After 30 seconds, “Hung Up” is displayed and a busy tone sounds.
•Press the R softkey again to retrieve the call.
Transferring a Call
1.Press the R softkey to put the call on hold.
2.Dial the number to which you want to transfer the call.
3.Press the On button to transfer the call.
Note: Supervised transfer feature is system- dependent.
Adjusting Volume Levels
To adjust earpiece volume
•Press Volume Up/Down button to increase/decrease volume during a call.
To change ringer volume:
Display Icons
Off hook (call in progress)
Audio signals off
Battery
Loudspeaker on/off
Headset connected
New message
Text input mode (capitals)
Text input mode (lower case)
Digit input mode
Phonebook
Locked keypad
Unanswered call
Incoming/Outgoing call
Unread/Read message
No
navigation key. |
2. Select the name to call from the list and |
then press the ON button. |
OR
•Press a
Answering a Call
•Press the ON button or the Accept softkey to answer a call in normal mode.
OR
•Press the Volume Up button or the middle softkey to answer in speaker mode.
Ending a Call
• Press the OFF button to end a call.
•In the Settings menu, highlight Alert Signals.
•Select Ring Signals and press >.
•Select a call type and a volume level.
•Press Select to activate your choice.
To turn Loudspeaker on/off:
•Press the middle softkey before or during a call.
To turn Mute on/off during a call:
•Press the Mute button. “Muted” is displayed.
To turn ring signal on/off in standby mode:
•Long press the Mute button to toggle ring signal on/off. The “Audio Signals Off” icon appears.
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2008, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
