1. PRE-OPERATION INSTRUCTIONS
1.1. Unpacking and Product Confirmation
Take the option unit out of the package, check the unit name, and confirm that the product is as you ordered and intact.
Note: This product may be used with the inverter manufactured during and after February, 1998.
The inverter may be used with this unit if its SERIAL number indicated on the rating plate and package plate has the following version or later. (The SERIAL number on the package plate uses the 3 most significant digits of the following
Model | SERIAL Number |
U82 | |
T82 | |
U82 | |
K82 | |
L82 | |
K82 | |
L82 | |
D82 |
U 8 2
Symbol Year Month Control number SERIAL number
SERIAL is made up of 1 version symbol and 8 numeric characters as shown above.
1.2. Packing Confirmation
Make sure that the package includes the following accessories: |
|
Instruction manual | 1 |
Mounting screws M3 10 | 2 |
Terminal resistor jumpers (Jumpers fitted to the terminal block) | 3 |
8