3. TV Features | 15 |
ChannelView Channel Listings
3.Press 
to highlight a bank.
4.Press MENU to see channels in the bank.
ChannelView displays program descriptions sent by broadcasters. This information may be unavailable in some areas.
•To allow tuning to any channel in memory, select the All bank.
About ChannelView
ChannelView™ shows memorized channels on the ANT input. It displays channel names and program information for digital channels. No program information is displayed for analog channels.
ChannelView allows you to set up three banks of custom channels for convenient access. You can save groups of channels by content (e.g., news, sports, children’s program- ming) or by TV user.
Note: You must first set the TV Clock (page 24) to receive ChannelView listings.
ChannelView, “All” tab. Programs for the tuned channel are listed on the right.
Photos and Moving Video as
Composite Video
Note: 838 series TVs can display photos and play mu- sic from a USB drive. See the detailed owner’s guide at
Connect the camera to the TV using a composite video cable and control the slide show or movie through the camera. The display resolution will be
1.Refer to the owner’s manual supplied with the camera for instructions needed for this setup.
2.Set the camera’s output signal type to NTSC and put the camera into playback mode.
3.With the camera still turned on, connect your digital camera’s composite video cable (usually yellow) to the TV’s Y/VIDEO jack. To hear audio, connect the camera’s audio output cable to the AUDIO L jack.
INPUT 3
Pr | Pb Y/ VIDEO L AUDIO R | USB | HDMI 4 |
ChannelView Custom Channel Banks
Select a channel bank to customize.
1.Press GUIDE to display ChannelView.
2.Press MENU to move the highlight to the bank header.
3.Press
to select Bank 1, 2, or 3.
4.With the bank name highlighted, press ENTER to enter setup mode where you can select channels to include in the bank.
5.Press EXIT when finished with setup.
Using Custom Channel Banks
•While watching TV, press CH
/
. The TV will tune only to channels stored in the current bank.
•To change to a different channel bank:
1.Press GUIDE.
2.Press MENU.
Downloaded From
Optional
Audio Cable
Camera connection using a composite video cable
4.When the New Device Found screen displays, assign the name Camcorder.
5.Press EXIT to close the New Device Found screen.
6.Highlight the icon for the camera input and press
ENTER.
7.If viewing photos, control the slideshow from the camera. Advance through the images manually or check if the camera can advance automatically.
For assistance call 1(800)
