Mitsubishi Electronics DD-6040 manual Hint for Optical Cable not Supplied

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS SUCH AS MD DECK OR DAT DECK

Use an audio coaxial or optical digital cable (not included) for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or Dat Deck:

or To S-VIDEO INPUT jack

To VIDEO	To VIDEO OUT jack
INPUT jack
	AUDIO OUT	L Y Cr
	OPTICAL COAXIAL
	DIGITAL AUDIO OUT	R VIDEO Cb S
	(PCM/BITSTREAM)

To S-VIDEO OUT jack

VIDEO OUT

I P

SCAN MODE

	To OPTICAL	To COAXIAL DIGITAL
	DIGITAL AUDIO	AUDIO OUT jack
Amplifier equipped with digital OUT jack
input jacks, MD deck,	To OPTICAL
DAT deck, etc.
	DIGITAL AUDIO
	INPUT jack
	or
	To COAXIAL DIGITAL AUDIO INPUT jack		[Fig. 6]

Notes

¡The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.

¡Set Dolby Digital and DTS to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers (See page 32 to set ON for Dolby Digital and DTS).

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS

If your TV does not have RCA type audio and video input jacks, it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator that is not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.

If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.

Note

¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.

HINT FOR OPTICAL CABLE (NOT SUPPLIED)

¡Optical cable (not supplied) may be damaged when bent at acute angles. Ensure cables are coiled in loops with a diameter of 6 inches or more when storing them.

¡Use a cable which is 9.8 feet or shorter.

¡Insert cable plugs firmly into the jacks when making connections.

¡If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a jack. ¡Replace the protective cap on the OPTICAL jack when it is not in use.

– 13 – EN

1L25