Digital Video Recorder
23
Highlight the + and press the button to add a schedule item.
NOTE: The higher the number under the No. heading, the higher its priority.
The Day box allows you to change the days that the scheduled recording will take place. Choose from:
Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to change the time range that the scheduled recording will take place. The
smallest time segment you can use is 15 minutes.
The Mode box allows you to change the recording mode that will be used. (– : No record, : Time (Time-lapse)
recording, : Event recording, : Time & Event recording) Refer to the Setting up the Basic Schedule… section
for information regarding each recording mode.
The Channel box allows you to select which cameras will be recorded.
Highlight the box under the Settings heading and press the button to define the recording settings. You
can set the ips and Quality of the recording for any modes you set up in the Mode column. If you do not set
the ips and Quality in the Settings column, the DVR will follow the default setting s. See below for details.
Highlight the box under the heading and press the button to delete the recording settings. You will
be asked to confirm that you want to delete the settings.
Highlight Default… and press the button. The Default screen appears.
You can save your Schedule changes by highlighting Save and pressing the button. Selecting Cancel
exits the screen without saving the changes.
EVENT SETUP
Your DVR can be set to detect many different events. You can also determine how it reacts to these events.
Figure 14 ─ Event menu.
Highlighting boxes under ips and pressing the button allows you to
set the images per second for Time and Event recording. You can select
from 0.10 to 30.0 (25.0 PAL) images per second. Highlighting boxes
under Quality and pressing the button allows you to set the recorded
image quality for Time and Event recording. You can select from:
Very High, High, Standard and Low.