Digital Video Recorder
35
Callback Settings (NETWORK Callback Tab)
The DVR can be set up to contact a computer running DX-PC For View (Remote Administration System)
when an event occurs.
Figure 24 ─ Callback setup screen.
Highlight Enable and press the button to toggle between On and Off. When Enable is turned On you
can change the IP addresses.
Highlight the IP Address box that you want to change and press the button. Enter the IP address of
the computer you want contacted during an event. You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times you would like the DVR to try contacting
the computer. You can select from 1 to 10 retries.
You can save your Callback changes by highlighting Save and pressing the button. Selecting Cancel
exits the screen without saving the changes.
CAMERA SETUP
Figure 25 ─ Camera Menu.