Mitsubishi Electronics fx3u 11.2.1Buffer memory that can be monitored with the FX Configurator-EN-L diagnostic function

11 - 7
MELSEC-F
TROUBLESHOOTING11
11 - 7
11.2.1Buffer memory that can be monitored with the FX Configurator-EN-L diagnostic
function
The following is a list of the buffer memory addresses that can be displayed on the
"Ethernet diagnostics" screen of FX Configurator-EN-L.
*1 Supported in the connections No. 1 and 2 only.
BFM address
Decimal
(hexadecimal)
Applicable buffer memory Ethernet diagnostics
display screen Display contents
32 (20H) Connection No.1
D Destination existence
confirmation (b1)
Status of each
connection
Connection No.1
Existence confirmation
Pairing open (b7) Paring open
Communication system (protocol)
(b8) Protocol
Open system (b15, b14) Open system
33 (21H) Connection No.2 (same as connection No.1) Connection No.2 (same as connection No.1)
34 (22H)
Connection No.3
Connection No.3 (same as connection No.1)
35 (23H) Connection No.4 (same as connection No.3) Connection No.4 (same as connection No.1)
105 (69H) Initial error code
Parameter status Module information
Initial error code
106 to 107
(6A to 6B H)Local station IP address IP address
108 to 110
(6C to 6E H)Local station Ethernet address Ethernet address
120 (78 H)
Connection No.1
Local station Port No. (Decimal)
Status of each
connection
Connection No.1
Local station Port No.
121 to 122
(79 to 7A H)Destination IP address Destination IP address
123 (7B H) Destination Port No. Destination Port No.
124 (7C H) Open error code Open error code
125 (7D H)Fixed buffer sending error code*1 Fixed buffer transfer error code*1
126 (7E H) Connection end code Connection end code
130 to 159
(82 to 9F H)Connection No.2 to 4 (same as connection No.1) Connection No.2 to 4 (same as connection No.1)
200 (C8 H) LED on/off status
[INIT.]LED (b0)
LED status LED display status
INIT.
[C1] to [C4] LED (b8 to b11) C1 toC4
[ERR.]LED (b3) ERR.
[COM.ERR.] LED (b4) COM.ERR.
227 (E3 H) Number of error occurrence
Error log
Latest
Number of error occurrences
229 (E5 H)
Error log block 1
Error code/End code Error code/End code
230 (E6 H) Subheader Subheader
231 (E7 H) Command code Command code
232 (E8 H) Connection No. Connection No.
233 (E9 H) Local station Port No. (Decimal) Local station Port No.
234 to 235
(EA to EB H)Destination IP address Destination IP address
236 (EC H) Destination Port No. Destination Port No.
238 to 372
(EE to 174 H)Error log block 2 to 16 (same as error log block 1) No.2 to 16 (same as the latest error log block)
376 to 377
(178 to 179 H)
IP
Received IP packet count
Status of each
protocol IP packet
Total number of echo reply sends
378 to 379
(17A to 17B H)
Received IP packet count
discarded due to sum check error Total number echo request sends
380 to 381
(17C to 17D H)Sent IP packet total count Total number echo reply receives
Protocol Open system Existence
confirmation Setting value
TCP
Unpassive Performed 8403H
Not performed 8401H
Fullpassive Performed C403H
Not performed C401H
UDP — Performed 0503H
Not performed 0501H