Mitsubishi Electronics fx3u user manual 11 - 27

11 - 27
MELSEC-F
TROUBLESHOOTING11
11 - 27
Error code
(abnormal
code)
Description of error Error handling
Storage destination
Initial
Open Fixed
sending
Connection
Error code
E-mail log
BFM#
105
BFM#
124
BFM#
125
BFM#
126
BFM#
229
BFM#
23361
C139H
System error
• The OS detected any error. (*1)
C13AH
The SMTP server was performing processing
and an error response was received.
(Exceeded the allocation of memory area)
• Check the status of the SMTP server.
C13BH
The SMTP server was performing processing
and an error response was received.
(Illegal mail box name)
• Check that the Ethernet module's mail
address is set correctly.
C13CH
System error
• The OS detected any error. (*1)
C13DHSMTP server authentication error.
• Check whether the SMTP login ID and SMTP
password are correct.
• Check the SMTP server status.
C13EHSMTP server authentication nonsupport error
• Check whether the SMTP server supports
authentication.
• Set [SMTP authentication method] to [No
authentication] or [POP before SMTP].
C140HCould not open the POP3 server.
• Check the port number of the POP3 server
setting.
• Check whether or not it is possible to
communicate with the POP3 server using the
Ping command.
C141H
Cannot communicate with the POP3 server.
(Error response)
• Check the port number of the POP3 server
setting.
• Check if the POP3 server is busy.
C142H
Cannot communicate with the POP3 server.
(Abort) • Check if the POP3 server is busy.
C143H
Cannot communicate with the POP3 server.
(Reset response) • Check if the POP3 server is busy.
C144H
Could not receive a response from the POP3
server.
• Check whether or not the POP3 server is
faulty.
• Check whether or not there is too much load
on the network.
• Check that the correct password is being
sent to the POP3 server.
C145HForcibly disconnected from the POP3 server. • Check whether or not the POP3 server is
faulty.
C146HCould not close the POP3 server.
• Check whether or not the POP3 server is
faulty.
• Check whether or not there is too much load
on the network.
C147H
Closing the POP3 server gave an error
response.
• Check whether or not the POP3 server is
faulty.
C150HPOP3 server authentication error • Check the status of the POP3 server.
C151H
The Ethernet module's mail address (e-mail
address setting parameter) is different from the
account name in the mailbox on the server side.
• Check the account name in the mailbox on
the server side and correct the mailbox
account set for the Ethernet module.
C152H
The Ethernet module's password (e-mail setting
parameter) is different from the password on the
server side.
• Check the password on the server side and
correct the password set for the Ethernet
module.
C153H
An error occurred when getting the received
mail list.
(Failed to obtain the list of arrived mail at the
POP3 server.)
• Check the status of the POP3 server.
• Send again after arbitrary set time has
passed.