[Example 1] When setting the AUTO POWER ON to ON. (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands | Status code from | Description |
from the PC, etc. | the projector |
|
30 30 41 50 4F 4E 31 0D |
| Command for setting the |
'0' '0' 'A' 'P' 'O' 'N' '1' ' ' |
| AUTO POWER ON to ON |
|
|
|
| 30 30 41 50 4F 4E 31 0D | Command receipt confirmation |
| '0' '0' 'A' 'P' 'O' 'N' '1' ' ' | (Command echo back) |
|
|
|
The data code of BRIGHTNESS of USER of COLOR TEMP. consists of the R, G and B data.
[Example 2] When setting the R data to +10, G data to 0, and B data to
Sending commands |
| Status code from | Description |
from the PC, etc. |
| the projector |
|
30 30 50 2B 31 30 2B 30 30 2D 30 35 0D |
| Command for setting the | |
'0' '0' 'Q' '+' '1' '0' '+' '0' '0' | ' |
| picture control |
|
|
|
|
|
| 30 30 50 2B 31 30 2B 30 30 2D 30 35 0D | Command receipt confirmation |
|
| '0' '0' 'Q' '+' '1' '0' '+' '0' '0' | (Command echo back) |
|
|
|
|
[Example 3] When checking the TINT setting (when the TINT is set to +10). (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands | Status code from | Description |
from the PC, etc. | the projector |
|
30 30 53 0D |
| Command for checking |
'0' '0' 'S' ' ' |
| the TINT setting |
|
|
|
| 30 30 53 2B 31 30 0D | Check result (+10) |
| '0' '0' 'S' '+' '1' '0' ' ' |
|
|
|
|
• To set TINT at 0, enter +00. |
| |
[Example 4] When setting the REFERENCE of GAMMA MODE - USER 1 to CINEMA, HIGH to
+3 and LOW to 0. (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands |
| Status code from | Description |
from the PC, etc. |
| the projector |
|
30 30 47 53 55 31 2B 32 20 30 32 2B 30 33 2B 30 30 OD |
| Command for setting the | |
'0' '0' 'G' 'S' 'U' '1' '+' '2' | ' |
| REFERENCE of GAMMA MODE |
|
|
|
|
|
| 30 30 47 53 55 31 2B 32 20 30 32 2B 30 33 2B 30 30 OD | Command receipt confirmation |
|
| '0' '0' 'G' 'S' 'U' '1' '+' '2' | (Command echo back) |
|
|
|
|
5
