Mitsubishi Electronics MDT402S Image Flip, Scan Mode, Scan Conversion, Film Mode, Monitor ID

	ADVANCED OPTION	IMAGE FLIP						Selects the image flipping or rotation.
	S-VIDEO MODE	NORMAL						NORMAL: Normal display.
	GAMMA SELECTION
		H MIRROR
	BLACK LEVEL EXPANSION
IMAGE FLIP	IMAGE FLIP	V MIRROR						H MIRROR: Mirror image for horizontal direction.
		ROTATE
	SCAN MODE
	SCAN CONVERSION
	FILM MODE							V MIRROR: Mirror image for vertical direction.
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU		:SEL		EXIT :RETURN MENU :EXIT MENU			ROTATE: Rotate the image 180 degrees.
	ADVANCED OPTION	SCAN MODE						Change the display area of the image.
	S-VIDEO MODE
	BLACK LEVEL EXPANSION
SCAN MODE	GAMMA SELECTION							OVERSCAN: Set to display area about 95%
	SCAN MODE		OVERSCAN		/	UNDERSCAN
	IMAGE FLIP
	SCAN CONVERSION	+ -: SEL			EXIT :RETURN MENU :EXIT MENU			UNDERSCAN: Set to display area about 100%
	FILM MODE
*:INPUT DVD/HD,VIDEO only	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
								Selects IP (Interlace to Progressive) converter function.
	ADVANCED OPTION							PROGRESSIVE: Enable the IP function, to convert
	S-VIDEO MODE	SCAN CONVERSION
	BLACK LEVEL EXPANSION							interlace signal to progressive. Normally use this setting.
SCAN CONVERSION	GAMMA SELECTION
	SCAN MODE	PROGRESSIVE			/	INTERLACE
	IMAGE FLIP
	SCAN CONVERSION							INTERLACE: Disable the IP function.
	FILM MODE							NOTE: This mode is better suited for motional pictures,
		+ -: SEL			EXIT :RETURN MENU :EXIT MENU
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
								but it is in danger of image retention.
								Select Film mode function.
	ADVANCED OPTION	FILM MODE						AUTO: Enable the Film mode function. This mode is
	S-VIDEO MODE							better suited for movies, which is converted 24 Frames/
	BLACK LEVEL EXPANSION
FILM MODE	GAMMA SELECTION
	IMAGE FLIP			AUTO	/	OFF		sec source to DVD Video. We recommend to select
	SCAN CONVERSION
	SCAN MODE
	FILM MODE							“PROGRESSIVE” in “SCAN CONVERSION”.
		+ -: SEL			EXIT :RETURN MENU :EXIT MENU
*:INPUT DVD/HD,VIDEO only	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU							OFF: Disable the Film mode function. This mode is
								better suited for Broadcasting or VCR source.
	ADVANCED OPTION	MONITOR ID						Set the Monitor ID number to control the daisy
	MONITOR ID
	IR CONTROL		ID No.			1		chained multiple MDT402S / MDT461S with RS-232C.
	HEAT STATUS
MONITOR ID	TILING
	POWER ON DELAY
	DATE & TIME
	SCHEDULE
	ADVANCED OPTION RESET	+ -: SEL			EXIT :RETURN MENU :EXIT MENU			The Monitor ID number is selectable between 1 and 26.
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
								Selects the infrared wireless remote controller mode
								with using the RS-232C daisy chain.
								The item in this menu will become effective by pressing
								“SET” button on the selected item.
								NORMAL: The monitor will be controlled normally by
	ADVANCED OPTION	IR CONTROL						wireless remote controller.
	MONITOR ID	NORMAL						PRIMARY: Set “PRIMARY” at the head of the daisy
		PRIMARY
	TILING
		SECONDARY
IR CONTROL	IR CONTROL
	POWER ON DELAY	LOCK
	HEAT STATUS							chained monitors by RS-232C.
	DATE & TIME
	SCHEDULE
	ADVANCED OPTION RESET							SECONDARY: Set “SECONDARY” after 2nd daisy
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU	:SEL SET :SET			EXIT :RETURN MENU :EXIT MENU
								chained monitor.
								LOCK: Disable the monitor control by infrared wireless
								remote controller.
								Keep pressing “DISPLAY” button during 5 sec or more,
								this setting will return to “NORMAL”.
								TILIN G demonstrates multiple screens. This feature
								provides a single large screen using up to 25 monitors.
								It will be able to divide up to 5 each H and V.
								This requires you to feed the PC output into each of the
								monitors through a distributor.
								Do not use MDT402S and MDT461S together for
	ADVANCED OPTION	TILING						TILING.
	MONITOR ID	H MONITORS				1		H MONITORS: Select number of horizontal divide.
TILING	IR CONTROL	V MONITORS				1
	TILING	POSITION				1
	POWER ON DELAY
	HEAT STATUS	ENABLE				YES /	NO	V MONITORS: Select number of vertical divide.
	DATE & TIME
		FRAME COMP.				YES /	NO
	SCHEDULE							POSITION: Select a position to expand the screen.
	ADVANCED OPTION RESET		:SEL			EXIT :RETURN
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU	+ -: ADJ				MENU :EXIT MENU
								Frame compensation: Works in tandem with TILIN G
								to compensate for the width of the tile bezels in order to
								accurately display the image.
								ENABLE: Select “YES”, the monitor will expand the
								selected position.
								PIP, POP, SIDE by SIDE and STILL and “DYNAMIC”
								ZOOM mode will be disabled when “TILING” is activated.

English

English-27

1-28