Mitsubishi Electronics MDT402S For long life use of Public Display, Image Sticking of LCD Panel

									Information of status for COOLING FAN, BRIGHTNESS
	ADVANCED OPTION		HEAT STATUS						and TEMPERATURE.
	IR CONTROL			STATUS		FAN1		ON	COOLING FAN comes to run when inside temperature
				COOLING
	MONITOR ID
HEAT STATUS	TILING			COOLING		FAN2		ON	is over a guaranteed limit.
	POWER ON DELAY			BRIGHTNESS				NORMAL
	HEAT STATUS
	DATE & TIME			TEMPERATURE			C	/ 32.0 F
	SCHEDULE			SENSOR 1		0.0			BRIGHTNESS comes to be decreased when inside
	ADVANCED OPTION RESET			SENSOR 1		0.0	C	/ 32.0 F
	:SEL SET :NEXT	EXIT :RETURN MENU :EXIT MENU			EXIT :RETURN			MENU :EXIT MENU	temperature is over guaranteed limit with cooling fun.
									In this case warning is displayed on the screen.
	ADVANCED OPTION								Adjusts the delay time from “standby” to “power on”
	MONITOR ID		POWER ON DELAY						mode.
POWER ON DELAY	IR CONTROL
	TILING					3 SEC.
	POWER ON DELAY
	HEAT STATUS
	DATE & TIME								“POWER ON DELAY” time is selectable between 0 and
	SCHEDULE
	ADVANCED OPTION RESET			+ -: ADJ		EXIT :RETURN MENU :EXIT MENU
	:SEL SET :NEXT	EXIT :RETURN MENU :EXIT MENU							50 sec.
	ADVANCED OPTION		DATE & TIME
				YEAR			2004
	MONITOR ID			MONTH			JANUARY
	IR CONTROL			DAY			01		Adjusts the current date and time for internal clock.
DATE & TIME	TILING			TIME
	POWER ON DELAY			DAYLIGHT SAVING			YES	/ NO
	HEAT STATUS						00	: 00	You should set this function when you use “SCHEDULE”.
	SCHEDULE			CURRENT DATE			TIME
	DATE & TIME
	ADVANCED OPTION RESET			JAN. 01. 2004 00 : 00 : 00
	:SEL SET :NEXT	EXIT :RETURN MENU :EXIT MENU		+ -: ADJ SET :SET EXIT :RETURN MENU :EXIT MENU
										Programs the monitor’s working
										schedule.
	ADVANCED OPTION									Schedule the power on and
	IR CONTROL									power off with hour and a day of
	MONITOR ID
SCHEDULE	TILING									the week. Also sets the input port.
	DATE & TIME
	POWER ON DELAY
	HEAT STATUS
	SCHEDULE									This OSD can’t remove except
	ADVANCED OPTION RESET
	:SEL SET :NEXT	EXIT :RETURN MENU :EXIT MENU								EXIT.
										(see “NOTE 3” on page 29 for
									EXIT	further information)
									Selecting ADVANCED OPTION reset allows you to reset
	ADVANCED OPTION								all OSD settings from ADVANCED OPTION settings,
	MONITOR ID		ADVANCED OPTION RESET						except for DATE & TIME, and SCHEDULE.
ADVANCED
	HEAT STATUS
	IR CONTROL				NO
	TILING								Select “YES” and press “SET” button to restore the
OPTION RESET	POWER ON DELAY				YES
	SCHEDULE
	DATE & TIME								factory preset data.
	ADVANCED OPTION RESET			:SEL		EXIT :RETURN MENU :EXIT MENU
	:SEL SET :NEXT	EXIT :RETURN MENU :EXIT MENU							Press “EXIT” button to cancel and then return the
									previous menu.

NOTE 1: IMAGE PERSISTENCE

Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

As with all personal display devices, We recommend displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Please set “SCREEN SAVER”, “DATE &TIME” and “SCHEDULE” functions to further reduce the risk of Image persistence.

For long life use of Public Display

< Image Sticking of LCD Panel >

When LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and residual or "ghost" image of previous image may be observed. (Image Persistence)

Image Persistence is not permanent, but when fixed image is displayed for long period, ionic impurities inside LCD are accumulated along the displayed image, and it is observed permanently. (Image Sticking)

< Recommendations >

For preventing the fast transition to Image Sticking, and for longer life usage of LCD, following are recommended.

1.Fixed image should not be displayed for long period, and changed to another images with short cycle.

2.When no use, please turn off the monitor by remote control, or use Power Management Function of monitor or use Schedule Function of monitor.

English-28

1-29