English-36

3) Control sequence

(1) The command from a computer to the LCD monitor will be sent in 600 ms.

(2) The LCD monitor will send a return command 600 ms* after it has received and encoded. If the command isn’t received

correctly, the LCD monitor will not send the return command.

(3) The personal computer checks the command and confi rms if the command, which has been sent, has been executed or

not.

(4) This LCD monitor sends various codes other than return code. When having a control sequence by RS-232C, reject other

codes from personal computers side.

* : The sending time of return command may delay depending on the condition (during changing of the input signal, etc.).

Example: Turn the power ON ( ‘ ’ is for ASCII code)

Meaning

30 30 21 0D

‘0’ ‘0’ ‘!’ ‘ ’

30 30 21 0D

‘0’ ‘0’ ‘!’ ‘ ’

Sending commands

from the PC

Status code from

LCD monitor

Command for

POWER ON

Command received

(Command echoed back)

4) Operation commands

The operation commands execute the basic operation setting of this LCD monitor.

It may not operate when changing the signal:

Operation ASCII HEX
POWER ON ! 21h
POWER OFF " 22h
INPUT RGB 1 _r1 5Fh 72h 31h
INPUT RGB 2 _r2 5Fh 72h 32h
INPUT RGB 3 _r3 5Fh 72h 33h
INPUT RGB 4 _r4 5Fh 72h 34h
INPUT VIDEO _v1 5Fh 76h 31h
INPUT DVD/HD _v2 5Fh 76h 32h
INPUT S-VIDEO** _v3 5Fh 76h 33h
INPUT RGB 5* _r5 5Fh 72h 35h
INPUT RGB 6 _r6 5Fh 72h 36h
• POWER OFF command should be operated over 1 minute after
the power is turned on.
• POWER ON command should be operated over 1 minute after
the power is turned off.
* RGB 5 becomes usable when the optional CAT5 Rx BOX is
mounted.
** S-VIDEO is SEPARATE only

5) Read command

Host computer sends the command without Data-code to monitor.

After receiving this command, the monitor returns the command with Data-code of current status to host computer.

Example: When Host computer ask Power status of monitor, the status of monitor is powered-on.

Command from computer
30 30 76 50 0D ‘0’‘0’‘v’‘P’[enter]
Command from Monitor Detail of command
Ask about the power status of monitor.
30 30 76 50 31 0D ‘0’‘0’‘v’‘P’‘1’[enter] Monitor is powered-on.

Structure of the Read-command

Function Data (Receive) Function Data (Receive)
ON vP
vP
1 76 50 31
OFF (stand by) 0 76 50 30
RGB-1 (HDMI) vI r1 76 49 72 31
RGB-2 (DVI-D) vI r2 76 49 72 32
RGB-3 (D-SUB) vI r3 76 49 72 33
RGB-6 (DISPLAY PORT)
RGB-4 (BNC)
vI r6 76 49 72 36
RGB-5* (CAT5)
* : RGB-5 becomes usable when the optional CAT5 Rx BOX is mounted.
vI r5 76 49 72 35
vI r4 76 49 72 34
Video vI v1 76 49 76 31
DVD/HD vI v2 76 49 76 32
S-VIDEO vI v3 76 49 76 33
HIGHBRIGHT vM
vM
p1 76 4D 70 31
STANDARD p2 76 4D 70 32
resolution
1 ˚C
resolution
1 ˚C
74 63 31 2B 20 32 35
74 63 32 2B 20 33 31
Input
Picture mode
Temperature
of internal
monitor
Around
Main board
Around
Power PCB
POWER
(ex.) +31
(ex.) +25
tc1
tc2
ASCII HEX
Downloaded From TV-Manual.com Manuals