5.How to install the horizontal vanes
If horizontal vanes are not installed correctly, both of the operation indicator lamps will flash. In this case, install the horizontal vanes correctly by following the procedures 1 to 6.
NOTE: Before installation of the horizontal vanes, disconnect the power supply plug and/ or turn off the breaker.
Upper vane |
|
|
|
|
6 | Stopper | 5 | Stopper | 4 |
Insert this end first. |
|
|
|
|
|
|
|
| Insert. |
Lock. |
|
| Lock. | In. |
|
|
|
Upper right
Lower vane
Insert this end first.
The holes on the insertion ends of the upper and lower horizontal vanes have different shapes.
| 3 | 2 |
| 1 |
Lower right | Lock. |
| Lock. | Insert. |
| In. | |||
|
| |||
|
|
|
|
In procedure 2,3,5, and 6, lock the stoppers until they click into place.
11