Installing the Air Filter (on some models)

The filter should be installed behind the vented door, which is located (depending on your model) along either the rear or left interior wall near the top of the refrigerator compartment.

1.Remove the air filter from its packaging.

2.Lift open the vented door.

3.Snap the filter into place.

Air Filter Status Indicator (on some models)

Style 1 - Install Manual Air Filter Status Indicator

The filter comes with a status indicator, which should be activated and installed at the same time the air filter is installed.

REPLACE

MONTHS

1.Place the indicator face-down on a firm, flat surface.

2.Apply pressure to the bubble on the back of the indicator, until the bubble pops to activate the indicator.

3.Lift open the vented air filter door. On some models, there are notches behind the door.

On models with notches:

■Slide the indicator down into the notches, facing outward.

NOTE: The indicator will not easily slide into the notches if the rear bubble has not been popped.

■Close the air filter door, and check that the indicator is visible through the rectangular hole in the door.

On models without notches:

■Store the indicator in a visible place you will easily remember - either inside the refrigerator, or elsewhere in your kitchen or home.

Style 2 - Air Filter Status on Electronic Control Display

The control panel displays the Air Filter status.

■GOOD - The air filter LED does not light up.

■REPLACE - The air filter LED lights up constantly when the refrigerator door is open.

■EXPIRED - The air filter LED lights up constantly and flashes when the refrigerator door is open.

After replacing the air filter, press and hold FILTERS RESET for

3 seconds. The filter icons will turn off. See “Using the Control(s).”

NOTE: At any filter status, pressing and holding FILTERS RESET for 3 seconds will reset the air filter status to good and the air filter LED will turn off.

Replacing the Air Filter

The disposable air filter should be replaced every 6 months, or when the status indicator air filter icon LED turns on and starts flashing when the refrigerator door is opened.

To order a replacement air filter, contact us using the assistance/service information following the warranty.

1.Remove the old air filter by squeezing in on the side tabs.

2.Remove the old status indicator.

3.Install the new air filter and reset the status indicator using the instructions in the previous sections.

REFRIGERATOR USE

Using the Controls

Depending on your model, the control panel is located either at the top front of the refrigerator compartment or on the dispenser display. Follow the instructions specific to your model.

IMPORTANT:

■Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer temperature controls to a colder than recommended setting will not cool the compartments any faster.

■The recommended setting should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

Interior Dispenser Models

The control panel is located at the top front of the refrigerator compartment.

For your convenience, the temperature control is preset at the factory. When you first install your refrigerator, make sure the control is still set to the recommended setting as shown.

Recommended Setting “3rd Snowflake”

12

Page 11 Page 13
Page 12
Image 12
Whirlpool whirlpool manual Refrigerator USE, Using the Controls, Style 1 Install Manual Air Filter Status Indicator
Page 11 Page 13

whirlpool specifications

Whirlpool, a leading name in home appliances, offers a wide range of washing machines designed to provide efficient cleaning and convenience. Renowned for their innovative technologies and user-friendly features, Whirlpool washing machines cater to a diverse range of washing needs.

One of the standout features of Whirlpool washing machines is their load sensing technology. This smart feature detects the weight of the load and automatically adjusts the water levels and cycle duration, ensuring optimal water and energy use. This not only enhances performance but also contributes to sustainability by minimizing unnecessary water consumption.

Whirlpool also incorporates advanced washing cycles in their machines. The EcoWash cycle, for instance, is designed for efficient cleaning while using less water and energy, making it an ideal choice for environmentally conscious consumers. Additionally, the Delicate cycle ensures that fragile fabrics receive a gentle wash, protecting them from damage while effectively removing dirt.

Another notable characteristic is the FreshCare option, available in several Whirlpool models. This technology periodically tumbles the laundry after the cycle has finished, preventing wrinkles and musty odors, and keeping clothes fresh for hours. This is particularly useful for those who might not be able to move their laundry immediately after the wash cycle concludes.

Whirlpool washing machines also come equipped with an intuitive control panel featuring a range of pre-set programs. Users can easily select the desired wash type based on fabric type and soil level, ensuring tailored care for garments. Many models also offer a delay start feature, allowing users to schedule their wash cycles to start at a convenient time.

Durability and ease of maintenance are other key characteristics of Whirlpool washers. Many of their models come with a reliable stainless steel drum, which is both resistant to rust and capable of handling large loads without compromising performance. The self-cleaning technology found in select models further enhances longevity by automatically washing the drum and maintaining optimal hygiene.

In conclusion, Whirlpool washing machines combine cutting-edge technology and thoughtful design to deliver effective, efficient, and user-friendly laundry solutions. With features like load sensing, diverse washing cycles, FreshCare technology, and intuitive control options, Whirlpool continues to set the standard for innovation and reliability in the home appliance market. Whether for everyday use or special care garments, Whirlpool washing machines provide versatility and peace of mind for every household.
Top Page Image Contents