7

SERVICE FUNCTIONS

MSZ-A09NA MSZ-A12NA MSZ-A15NA MSZ-A17NA MSZ-A24NA

MSY-A15NA MSY-A17NA MSY-A24NA

7-1. TIMER SHORT MODE

For service, set time can be shortened by short circuit of JPG and JPS the indoor electronic control P.C. board. The time will be shortened as follows. (Refer to 8-7.)

Set time : 1-minute ➔ 1-second

Set time : 3-minute ➔ 3-second (It takes 3 minutes for the compressor to start operation. However, the starting time is shortened by short circuit of JPG and JPS.)

7-2. P.C. BOARD MODIFICATION FOR INDIVIDUAL OPERATION

A maximum of 4 indoor units with wireless remote controllers can be used in a room.

In this case, to operate each indoor unit individually by each remote controller, P.C. boards of remote controller must be modified according to the number of the indoor unit.

How to modify the remote controller P.C. board

Remove batteries before modification.

The board has a print as shown below :

 

NOTE : For modification, take out

 

the batteries and press the

 

OPERATE/STOP(ON/OFF)

 

button twice or 3 times at

 

first.

 

After finish modification,

 

put back the batteries then

J1 J2

press the RESET button.

The P.C. board has the print “J1” and “J2”. Solder “J1” and “J2” according to the number of indoor unit as shown in Table 1. After modification, press the RESET button.

Table 1

 

1 unit operation

2 units operation

3 units operation

4 units operation

 

 

 

 

 

No. 1 unit

No modification

Same as at left

Same as at left

Same as at left

 

 

 

 

 

No. 2 unit

–

Solder J1

Same as at left

Same as at left

 

 

 

 

 

No. 3 unit

–

–

Solder J2

Same as at left

 

 

 

 

 

No. 4 unit

–

–

–

Solder both J1 and J2

How to set the remote controller exclusively for particular indoor unit

After you turn the breaker ON, the first remote controller that sends the signal to the indoor unit will be regarded as the remote controller for the indoor unit.

The indoor unit will only accept the signal from the remote controller that has been assigned to the indoor unit once they are set.

The setting will be cancelled if the breaker has turned off, or the power supply has shut down. Please conduct the above setting once again after the power has restored.

10

Page 9 Page 11
Page 10
Image 10
Mitsubishi Electronics MSY-A17NA Service Functions, Timer Short Mode, P.C. Board Modification for Individual Operation
Page 9 Page 11

MSY-A15NA, MSZ-A09NA, MSZ-A17NA, MSZ-A12NA, MSZ-A24NA specifications

Mitsubishi Electronics is a renowned name in the HVAC (heating, ventilation, and air conditioning) industry, known for innovative, efficient air conditioning solutions. The MSY-A17NA, MSY-A24NA, MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA models exemplify this legacy, offering advanced features and cutting-edge technology. These models cater to various room sizes and requirements, providing comfortable and reliable climate control.

The MSY-A series, including the MSY-A17NA and MSY-A24NA, is designed for both cooling and heating. They feature inverter technology, which optimizes energy use by adjusting compressor speed based on demand, resulting in significant energy savings. The units come equipped with high-performance filters that capture dust and allergens, ensuring cleaner air.

Additionally, the MSY models incorporate a quiet operation mode, making them ideal for residential use. The user-friendly remote control allows for easy adjustments, while the programmable timer adds convenience for scheduling operation times to align with the user's lifestyle. Both models are built with durability in mind, featuring rust-resistant cabinets and high-quality components that extend the lifespan of the unit.

On the other hand, the MSZ-A models, which include the MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA, are wall-mounted indoor units that complement the MSY outdoor models. With their sleek design, they blend seamlessly into any interior decor. The MSZ-A units also utilize inverter technology, enhancing energy efficiency and providing fast cooling and heating performance.

One notable feature of the MSZ-A series is the advanced air purification system, which goes beyond standard filtration. It includes technologies that neutralize odors and harmful gases, creating a healthier indoor environment. The models also come with a quiet operation mode, making them suitable for bedrooms and other quiet spaces.

All Mitsubishi MSY and MSZ models have been built with proactive environmental considerations, complying with high energy efficiency standards. They contribute to lower electricity bills and reduced carbon footprints. Furthermore, their compact design ensures easy installation in various settings without sacrificing performance.

In summary, Mitsubishi Electronics' MSY-A17NA, MSY-A24NA, MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA models stand out in the competitive HVAC market. With features like inverter technology, advanced air purification, and user-friendly controls, these air conditioners deliver outstanding performance, comfort, and reliability while promoting energy efficiency and sustainability.
Top Page Image Contents