Mitsubishi Electronics MSZ-A24NA, MSY-A24NA, MSY-A15NA, MSY-A17NA 3 4 Swing 5, COOL/DRY Heat

(9) To change the air flow direction not to blow directly onto your body. (MSZ-A09/12/15/17, MSY-A15/17)

To change the air	When to use this function?	COOL/DRY		HEAT
flow direction
				(for MSZ)
Pressing and holding	Use this function if you don’t	The air conditioner starts the	The air conditioner starts heat-
VANE CONTROL	want the air from the indoor	cooling or drying operation	ing operation approx. 3 minutes
button for 2 seconds	unit to blow directly onto your	approx. 3 minutes after the	after the vane has moved to the
	body.	vane has moved to the hori-	horizontal position.
or more causes
	• Depending on the shape of	zontal position.	•	Sometimes the area
the horizontal vane
	the room,the air may blow
		• When VANE CONTROL		around your feet may not
to reverse and
	directly onto your body.
				warm. To warn the area
move to horizontal		button is pressed again,
		the vane returns to the		around the feet, set the
position.	• Press VANE CONTROL
		previously-set position		horizontal vane to
	button again to return the
		and the air conditioner		(AUTO) or the downward-
	vane to the previously-set
		starts the cooling or		blowing position.
	position.
		drying operation in	•	When VANE CONTROL
Horizontal
		approx. 3 minutes.
				button is pressed again,
position
				the vane returns to the
				previously-set position
				and the air conditioner
				starts the heating operation
				in approx. 3 minutes.

NOTE:

•If you make the air flow not to blow directly onto your body by pressing VANE CONTROL button, the compressor stops for 3 minutes even during the operation of the air conditioner.

•The air conditioner operates with Very Low speed until the compressor turns on again.

(10)ECONO COOL ( ) operation (ECONOmical operation)

When ECONO COOL button is pressed in COOL mode, set temperature is automatically set 3.6°F higher than that in COOL mode.

Also the horizontal vane swings in various cycle.

SWING operation makes you feel cooler than set temperature. So, even though the set temperature is higher than that in COOL mode, the air conditioner can keep comfort. As a result, energy can be saved.

ECONO COOL operation is cancelled when ECONO COOL button is pressed once again or VANE CONTROL button is pressed or change to other operation mode.

(11) POWERFUL ( ) operation

The air conditioner automatically adjusts the fan speed and the set temperature, and operates the POWERFUL mode.The POWERFUL mode is automatically released 15 minutes after operation starts, and the operation mode returns to the mode prior to POWERFUL operation.

2.Vertical vane (MSZ-A24, MSY-A24)

(1)Vane motor drive

These models are equipped with a stepping motor for the vertical vane. The rotating direction, speed, and angle of the motor are controlled by pulse signals (approximate 12V) transmitted from microprocessor.

(2)The vertical vane angle and mode change as follows by pressing WIDE VANE button.

1 2 34 SWING 5 6

(3)Positioning

The vane is once pressed to the vane stopper to confirm the standard position and then set to the desired angle. Confirming of standard position is performed in the following cases.

(a)When OPERATE/STOP(ON/OFF) button is pressed (POWER ON/OFF).

(b)When SWING is started or finished.

(c)When the power supply turns ON.

(4)SWING MODE ( )

By selecting SWING mode with WIDE VANE button, the vertical vane swings horizontally. The remote controller displays “ .”

46