7
JWeekly timer Checking
1In the Weekly timer mode, select and set
“”.
☞ See “Selecting Weekly timer setting” step 1 to 5 on page 5.
The display shows the detailed timer operation setting
information of the smallest timer operation number on the day
of the week as showm on the left. (But if not set, “ ”
is displayed.)
2 Press ▲ or ▼ button.
Detailed timer operation setting are displayed in accordance with
the timer operation you have selected.
Press▼ button to display from Sunday and the lowest timer
operation number.
Press▲ button to display the settings in the reverse order.
3Press button.
Timer mode ends.
2
3
JWeekly timer Mode Setting Canceling
It is possible to cancel Weekly timer mode settings of each day of the week, as well as individual timer operation number.
See “Timer Operation Cancellation Mode” on page 8 to cancel settings of all days of week.
1In the Weekly timer mode, select and set

“”.

☞ See “Selecting Weekly timer setting” step 1 to 5 on page 5.
The display shows the detailed timer operation setting information
of the smallest timer operation number on the day of the week as
showm on the left.
2Press▲ or ▼ button.
Detailed timer opetation setting are displayed in accordance with
the timer operation you have selected.
Press▼ button to display from Sunday and the lowest timer
operation number.
Press▲ button to display the settings in the reverse order.
Select the timer operation number on a day of the week you
want to cancel.
If you press the RESET button, the remote control will
return to the previous screen, and display “ ”.
3Press SET button.
“ ” is displayed.
If you press the RESET button, the remote control will
return to the previous screen, and display “ ”.
4Press SET button.
“” is displayed, and the displayed detail timer operation
settings disappears and is canceled.
È
“ ” is displayed again.
Repeat step 2 to 4 to continue canceling other settings.
5Press button.
Timer mode ends.
253•4
• If you press button while timer mode
is operative, timer mode is canceled and the
display will return to the original display.
•If you do not press any button for several
minutes after entering the timer mode, the timer
mode ends and returns to the original display.
NOTICE
JCanceling Holiday Setting
HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >
JWeekly timer Holiday Setting
It is possible to disable the timer settings temporarily which has been already set by applying Holiday Set on
a particular day of the week. When the Holiday Setting is cancelled, the timer setting is enabled again.
1In the Weekly timer mode, select and set
“”.
☞
See “Selecting Weekly timer setting” step 1 to 5 on page 5.
“ ”is displayed in the display area
(▼is flashing)
“” is displayed.
2Press▲ or ▼ button.
Move the “▼” mark displayed above the days of week to the
day which you want to set as Holiday.
Press▲ and ▼ to move to the right and left respectively.
If you press the ▲ button when the “▼” marks are displayed on
from “MON” to “FRI”, and then “SUN” to “SAT” (every day) with
flash. This can be used in case you would like to apply Holiday
setting on these days.
In case press the RESET button, the remote control will
return to the previous screen and display “ ”.
3Press SET button.
The “▼” mark above the day of the week switches from flashing
to lighting stably, the day set as a holiday is lit with ( ) , and the
following is displayed.
[] (lit)
“ ” (lit for two seconds)
È
[] (lit)
“”(lit)
After the holiday setting has been completed, the remote control
returns to step 1. Repeat step 2 and 3 to continue setting further
holidays.
NOTICE
If you set a day of the week for which no timer operation is set,
“” is displayed for two seconds and the display returns
to the one shown in step 1.
4Press button.
Timer mode ends.
32
4
1In the Weekly timer mode, select and set
“”.
☞ See “Selecting Weekly timer setting” step 1 to 5 on page 5.
2Press▲ or ▼ button.
Move the “▼” mark displayed above the day of week to the
day on which you want to cancel Holiday setting.
Select a day of the week that has been set as holiday.
3Press SET button.
( ) display is turned off and the following is displayed.
[] (lit)
“ ” (lit for two seconds)
È
[] (lit)
“” (lit)
After the holiday setting has been canceled, the remote control
returns to step 1. Repeat step 2 and 3 to continue canceling
further holiday settings.
4Press button.
Timer mode ends.
•If you press button while timer mode
is operative, timer mode is canceled and the
display will return to the original display.
•If you do not press any button for several
minutes after entering the timer mode, the timer
mode ends and returns to the original display.
NOTICE