12-53
1
2
3
12
6
6
7
8
12.1 Error Code List
12.1.6 Error code list (4000 to 4999)
4101
[OPERATION ERROR]
•The number of setting data dealt with the
instruction exceeds the applicable range.
•The storage data and constant of the device
specified by the instruction exceeds the
applicable range.
•When writing to the host CPU shared memory,
the write prohibited area is specified for the write
destination address.
•The range of storage data of the device specified
by the instruction is duplicated.
•The device specified by the instruction exceeds
the range of the number of device points.
•The interrupt pointer No. specified by the
instruction exceeds the applicable range.
■Collateral information
•Common Information:Program error location
•Individual Information:–
■Diagnostic Timing
•W hen instruction executed Read the common information of the error using
the peripheral device, check error step
corresponding to its numerical value (program error
location), and correct the problem.
RUN:
Off/On
ERR.:
Flicker/On
CPU Status:
Stop/
Continue*1
QCPU
[OPERATION ERROR]
•The storage data of file register specified by the
instruction exceeds the applicable range. Or, file
register is not set.
■Collateral information
•Common Information:Program error location
•Individual Information:–
■Diagnostic Timing
•W hen instruction executed
QnU*10
[OPERATION ERROR]
•The block data that crosses over the boundary
between the internal user device and the
extended data register (D) or extended link
register is specified (including 32-bit binary, real
number (single precision, double precision),
indirect address, and control data)
■Collateral information
•Common Information:Program error location
•Individual Information:–
■Diagnostic Timing
•W hen instruction executed
QnU
Error
Code
(SD0)
Error Contents and Cause Corrective Action LED Status
CPU Status
Corresponding
CPU
*1 CPU operation can be set in the parameters at error occurrence. (LED indication varies.)
*10 The Universal model QCPU except the Q00UJCPU.