Mitsubishi Electronics SD105U user manual Specifications, Kensington Lock

Specifications

Type	DLP™ DATA projector
		ENGLISH
Model	SD105U
Rated power supply	100 - 240 V AC, 50 / 60 Hz
Rated input	2.6 A
Display Technology	0.55-inch Single chip Digital Micromirror Device (DMD) with R,G,B,W color wheel
	Pixels 800 x 600 = 480000 pixels
Colors	16770000 colors
Projection lens	F 2.5 (Wide), f = 19.9 - 21.4 mm
Light source lamp	160 W
Picture size	40 - 300 inch (Wide), aspect ratio 4:3
PC compatibility	Resolution:640x400 (Expand) - 800x600 (Real) - 1024x768 (Compress)
	Sync on Green available
Video compatibility	NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
	Component Video (DVD/HDTV) (480l, 576l, 480P, 576P, 1080l, 720P)
Speaker	2 W Mono, Round type ø2.5 cm x 1
S-video input	Luminance signal: 1.0 Vp-p 75 Ω (negative sync.)
	Chroma signal: 0.286 Vp-p 75 Ω (burst signal)
Video input	1.0 Vp-p 75 Ω (negative sync.)
Audio input	350 mVrms, 10 kΩ or more
	RGB: 0.7 Vp-p 75 Ω (negative sync.)
Analog RGB input	YPBPR/YCBCR : Y:1.0 Vp-p (negative sync.) PBPR/CBCR:0.7 Vp-p
	HD/CS : TTL level (positive or negative)
	VD : TTL level (positive or negative)
Control connector	Serial terminal (RS-232C) (D-SUB 9-pin)
	USB terminal (for Page Up/Down)
Outside dimensions	256 x 102 x 223 mm (width x height x depth)
Weight	Approx. 2.9 kg
Length of power cord	71 inch (1.8 m)
Temperature, humidity	+41ºF (+5ºC) - +95ºF (+35ºC), 30 - 90%
(performance guaranteed)

•The specifications and outside appearance of the projector are subject to change without prior notice.

Kensington Lock

This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below. Kensington Technology Group

2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone : +1- (650) 572-2700	Fax : +1- (650) 572-9675

EN-27