242. TV Menus
Picture, continued
Picture Perfect
(PerfectColor, 842 Series)
PerfectColor Sliders Adjusts the saturation (intensity) of six colors for the current image source.
PerfecTint Sliders Adjusts six hues for the current image source.
Using PerfectColor:
Highlight the Perfect icon and press ENTER to display the PerfectColor menu. Settings are retained independently for each TV input.
Using PerfecTint:
• To switch between PerfectColor™ and PerfecTint™ adjustments, highlight PerfectColor/PerfecTint and press | . |
•Press
to move from one color bar to the next.
•Press
to change settings.
•Press CANCEL to restore default settings.
•Press MENU to return to the main menu.
Picture Advanced
Picture > Advanced allows you to save highly customized picture adjust- ments for each input. Mitsubishi recommends these adjustments be made only by a trained professional installer.
1.Press MENU. Under Picture, highlight the Advanced icon and press ENTER.
2.With Picture Mode (the first option) highlighted, press ENTER to change from blank (undefined) to ADV1 (daytime settings) or ADV2 (nighttime settings).
3.Use
to highlight an option you wish to change and press ENTER to see the adjustment display.
4.Press
to change settings.
5.Use
to navigate to additional options and press
to change settings.
6.Press MENU to return to the Picture > Advanced menu and save the adjustments for the current input. Press EXIT to close the menu.
Saving Custom 3D Settings
This menu can be used to create a custom Picture Mode for viewing 3D content. Mitsubishi recommends saving 3D settings under the name ADV1 and 2D set- tings under the name ADV2.
To create a custom 3D picture mode:
•The TV must be receiving a 3D signal
•One of the TV’s 3D Source Formats must be selected
•You must be wearing 3D glasses matched to the emitter in use.
Locking Custom Picture Mode Settings
842 Series. Once set up, you can protect custom Picture Mode settings with a pass code. With the Picture > Advanced menu displayed, highlight the Picture Mode name and press keys
7 4 1 5 3 6 9 ENTER .
Once locked, the name of each Picture Mode changes:
ADV1 is locked as ISF Day/3D
ADV2 is locked as ISF Night/2D
Use the same key sequence to unlock the settings and make changes.
To Use a Custom Picture Mode at a Later Time
•Press VIDEO and use
to find the Picture Mode
option. Press
to select the desired mode.
•Press MENU and go to Picture > Video > Picture Mode and select the desired mode.
To Return to the Default Values for Advanced Display the Picture > Advanced menu and:
1.Highlight the name of the Advanced mode to change.
2.Highlight RESET Pic Mode and press ENTER. You must perform the reset separately for both ADV1 and ADV2.
For assistance call 1(800)
