IR Emitter Placement

565. NetCommand IR Control

The NetCommand system uses emitters connected to the IR–NetCommand Output jack to control other devices such as DVD players, cable boxes, satellite receivers, and VCRs.

IR emitter cables are available for purchase from Mitsubishi. Call (800) 553-7278 and request either part number 242D483020 (two-ended cable) or part number 299P254020 (four-ended cable).

1.Connect the plug end of the IR emitter cable to the IR—NetCommand Output jack on the TV back panel.

2.When the New Device Found screen displays, leave IR—NetCommand Output selected.

3.Highlight EXIT and press ENTER.

The New Device Found screen displays when you connect the IR emitter.

4.Position the emitter end with the emitter bulb facing the device’s remote control sensor. The bulb emits infrared light in a cone-shaped pattern. Place the bulb far enough from the sensor to allow the cone pattern to reach the sensor.

In some cases, the emitter works better facing downward from the top of the device. Experiment to find what works best.

5.Secure the emitter ends in place using double- sided tape.

6.Place any unused ends behind the devices to prevent stray signals from reaching the IR sensors.

IMPORTANT

Position IR emitters so that each device’s sensor “sees” the signal from only one emitter. Otherwise, a device receiving signals from multiple sources (remote controls, IR emitters) may not respond at all.

Other A/V Device	AVR AUDIO O
	R

A/V Receiver

Connecting IR–NetCommand Output

	In front of a single	IR sensor
	average-sized device	IR sensor
	average-sized device
IR sensor	On top of a single
IR sensor	tall device
IR sensor	tall device	IR sensor
		IR sensor
	In front, shared by	IR sensor
	two average-sized	IR sensor
	two average-sized
	devices

Place IR emitters so the signal can be “seen” by the IR sensor on each device.

If You are Unable to Locate a Device’s IR Sensor

•The IR sensor is usually behind the plastic window of the front display panel. Using a flashlight, you may be able to see it as a round or square cutout.

•If you cannot see the sensor and the device’s Owner’s Guide does not specify the location, do the following using the device’s remote control.

1.Starting at one end of the plastic window, hold the device’s remote control about one-half inch from the front of the device and press the

POWER key.

2.If the device does not respond, move the remote control one inch toward the center and try again. Repeat until the device responds.

3.Repeat the previous steps starting at the other end of the window. The sensor will be between these two points.

SeriesLT-40151 specifications

The Mitsubishi Electronics Series LT-40151 is a cutting-edge display solution designed for various professional applications, offering a combination of advanced technology, superior features, and robust performance. This model is particularly known for its impressive visual quality, energy efficiency, and flexibility, making it suitable for both commercial and industrial environments.

One of the main features of the LT-40151 is its 40-inch LED display, which provides vibrant color reproduction and sharp image clarity. The high-definition resolution ensures that images and videos maintain their detail, whether used in presentations, advertising, or informational displays. The display also boasts a wide viewing angle, allowing for visual consistency from different positions in the room, making it ideal for large audiences.

A notable technological advancement of the LT-40151 is its integrated image processing capabilities. This enables the screen to optimize content in real-time, adjusting brightness, contrast, and color levels based on ambient lighting conditions. This automatic adaptation ensures that visuals remain clear and legible in various environments, whether in bright retail settings or dimly lit conference rooms.

Durability is another critical characteristic of the LT-40151. It is designed to withstand the rigors of continuous operation, making it an excellent choice for environments that require 24/7 usage. The robust build quality is complemented by energy-efficient features, significantly reducing operational costs over time while minimizing environmental impact.

Connectivity is a strong suit of the LT-40151, supporting a range of inputs including HDMI, DisplayPort, and USB connections. This versatility allows users to connect multiple devices seamlessly, enhancing its usability in diverse scenarios. Additionally, the display is compatible with various mounting options, providing flexibility for installation in various settings.

The user-friendly interface integrated into the LT-40151 facilitates easy navigation and set-up, ensuring that users can quickly adjust settings and configurations to suit their preferences.

In conclusion, the Mitsubishi Electronics Series LT-40151 is a sophisticated display solution that combines advanced visual technology, durability, and flexible connectivity, making it a top choice for professionals seeking reliable and high-quality performance in their display systems.

Mitsubishi Electronics SeriesLT-40151 manual IR Emitter Placement, Power key

Models: SeriesLT-40151