Mitsubishi Electronics WD8700U Ksh, HORIZ. Curved ARC VERT. Curved ARC, Ksrst, Cnlrv, Cnlrh, Cvah

[Example] When displaying the MENU selection bar. (Values enclosed in quotation marks are ASCII codes.):

• When ID is not specified:

Command sent from the PC, etc.	Status code returned	Description
	from the projector
‘30’ ‘30’ ‘72’ ‘35’ ‘34’ ‘0D’		Command operating the same as
00r54		the MENU button (ID command is
		omitted.)
	‘30’ ‘30’ ‘72’ ‘35’ ‘34’ ‘0D’	Command receipt confirmation (The
	00r54	statuses are echoed back as many
		as the number of the connected
		projectors.)

• When ID is specified (when the command is sent to the projector with the ID of “01” or “ALL”):

Command sent from the PC, etc.	Status code returned	Description
	from the projector
‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘72’ ‘35’ ‘34’ ‘0D’		Command operating the same as the
00;01;r54		MENU button is sent to the projector
		with the ID of “01” or “ALL.”
	‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘72’ ‘35’ ‘34’ ‘0D’	Command receipt confirmation
	00;01;r54	(The status is echoed back from the
		projector with the ID of “01” or “ALL.”)

5.4Direct commands (Not executable in stand-by mode. Possible only to read during BLANK.)

The direct commands are used to numerically adjust the geometrical correction and bright uniformity correction.

When the computer sends the command without adding the setting value, the projector returns the received command with the current setting value added as a data code.

ITEM		Function	Data
	Character	ASCII code
KEYSTONE (vertical)	KS	4Bh 53h	±40
			With CURVED-adjustment : ±10
KEYSTONE (horizontal)	KSH	4Bh 53h 48h	±25
			With CURVED-adjustment : ±10

KEYSTONE reset

CORNERSTONE LOWER RIGHT (vertical)

CORNERSTONE LOWER RIGHT (horizontal)

CORNERSTONE LOWER LEFT (vertical)

CORNERSTONE LOWER LEFT (horizontal)

CORNERSTONE UPPER RIGHT (vertical)

CORNERSTONE UPPER RIGHT (horizontal)

CORNERSTONE UPPER LEFT (vertical)

CORNERSTONE UPPER LEFT (horizontal)

CORNERSTONE reset

HORIZ. CURVED ARC

VERT. CURVED ARC

HORIZ. CURVED ORIGIN (vertical)

HORIZ. CURVED ORIGIN (horizontal)

VERT. CURVED ORIGIN (vertical)

VERT. CURVED ORIGIN (horizontal)

CURVED reset

BRIGHT UNIFORMITY CORRECTION (level)

BRIGHT UNIFORMITY CORRECTION (correcting position) (vertical)

BRIGHT UNIFORMITY CORRECTION (correcting position) (horizontal)

KSRST	4Bh 53h 52h 53h 54h
CNLRV	43h	4Eh 4Ch 52h 56h
CNLRH	43h	4Eh 4Ch 52h 48h
CNLLV	43h	4Eh 4Ch 52h 56h
CNLLH	43h	4Eh 4Ch 52h 48h
CNURV	43h	4Eh 55h 52h 56h
CNURH	43h	4Eh 55h 52h 48h
CNULV	43h	4Eh 55h 52h 56h
CNULH	43h	4Eh 55h 52h 48h
CKSRST	43h	4Bh 53h 52h 53h 54h
CVAH	43h	56h	41h	48h
CVAV	43h	56h	41h	56h
CVHOV	43h	56h	48h	4Fh 56h
CVHOH	43h	56h	48h	4Fh 48h
CVVOV	43h	56h	56h	4Fh 56h
CVVOH	43h	56h	56h	4Fh 48h
CVRST	43h	56h	52h	53h 54h
BUCL	42h	55h	43h	4Ch
BUCV	42h	55h	43h	56h
BUCH	42h	55h	43h	48h

±60

±60

±60

±60

±60

±60

±60

±60

±99

With KEYSTONE- or CORNERSTONE-adjustment

:±30

±99

With KEYSTONE- or CORNERSTONE-adjustment

:±30

±10

±10

±10

±10

050 to 100

(Changeable in five increments)

1 to 7

1 to 7

How to set the value

Use the character or ASCII code as shown below to set the value.

Character	+	-	0	1	2	3	4	5	6	7	8	9
ASCII code	‘2Bh’	‘2Dh’	‘30h’	‘31h’	‘32h’	‘33h’	‘34h’	‘35h’	‘36h’	‘37h’	‘38h’	‘39h’

11