16
5.6.6 SIGNAL menu
ITEM Function Data
Character ASCII code
MEMORY CALL MMC 4Dh 4Dh 43h 0 (AUTO), 1 to 8 (MEMORY 1 to 8)
HORIZ.POSITION HP 48h 50h + (increment), - (decrement)*1
VERT. POSITION VP 56h 50h + (increment), - (decrement)*1
FINE SYNC. FN 46h 4Eh 00–31
TRACKING TRK 54h 52h 4Bh + (increment), - (decrement)*1
COMPUTER INPUT CIN 43h 49h 4Eh 0 (RGB), 1 (YCBCR/YPBPR), 2 (AUTO)
OVER SCAN VOS 56h 4Fh 53h 00 (90%) – 10 (100%)
HOLD HLD 48h 4Ch 44h 0 (OFF), 1 (ON)
HOLD BEGIN HLB 48h 4Ch 42h 00–99
HOLD END HLE 48h 4Ch 45h 00–99
ASPECT SC 53h 43h 0 (NORMAL, 1 (16:9), 2 (NATIVE), 3 (FULL),
4 (USER)
ASPECT-USER-
ZOOM(H)
ZMH 5Ah 4Dh 48h 050 to 500
NAK is returned when the ASPECT setting is other
than USER.
ASPECT-USER-ZOOM(V) ZMV 5Ah 4Dh 56h 050 to 500
NAK is returned when the ASPECT setting is other
than USER.
ASPECT-USER-HORIZ.
POSITION
AHP* 41h 48h 50h *:+, -
+:incriment -:decriment
NAK is returned when the ASPECT setting is other
than USER.
ASPECT-USER-VERT.
POSITION
AVP* 41h 56h 50h *:+, -
+:incriment -:decriment
NAK is returned when the ASPECT setting is other
than USER.
ASPECT-USER-RASTER
POSITION(H)
RPH* 52h 50h 48h *:+, -
+:incriment -:decriment
NAK is returned when the ASPECT setting is other
than USER.
ASPECT-USER-RASTER
POSITION(V)
RPV* 52h 50h 56h *:+, -
+:incriment -:decriment
NAK is returned when the ASPECT setting is other
than USER.
ASPECT-USER-RESET ASRST 41h 53h 52h 53h 54h The setting contents of ASPECT USER are reset.
NAK is returned when the ASPECT setting is other
than USER.
CLAMP POSITION CLP 43h 4Ch 50h 001 to 255
CLAMP WIDTH CLW 43h 4Ch 57h 01 to 63
VERT. SYNC. VSC 56h 53h 43h 0 (AUTO), 1 (OFF)
LPF LPF 4Ch 50h 46h 0 (OFF), 1 (ON)
SHUTTER(U) SHU 53h 48h 55h 000 to 142
SHUTTER(L) SHL 53h 48h 4Ch 000 to 142
SHUTTER(LS) SHLS 53h 48h 4Ch 53h 000 to 192
SHUTTER(RS) SHRS 53h 48h 52h 53h 000 to 192

*1) Setting range differs depending on the input signals.

5.6.7 NETWORK menu
ITEM Function Data
Character ASCII code
PROJECTOR NAME NAME 4Eh 41h 4Dh 45h Up to 15 single-byte alphanumeric characters
Effective only during P-ON.
NETWORK RESTART NRCN 4Eh 52h 43h 4Eh LAN microcomputer is reset and restarted.

• Some commands are not executed depending on the input signal. The operational restrictions same as those

on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.