Mitsubishi Electronics X80 Menu operation continued, Image, as the number increases, Installation

Menu operation (continued)

1IMAGE

CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher			Opt	XGA60
as the number increases.
BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as	IMAGE
the number increases.		CONTRAST		0
COLOR MATRIX. ...... Adjusts color balance in each color of the image. See page		BRIGHTNESS		0
18.		COLOR MATRIX		USER
COLOR TEMP... . Adjusts color temperature. See page 18.		COLOR TEMP.		STANDARD
SHARPNESS ...... Adjusts the picture sharpness. The sharpness becomes		SHARPNESS		0
sharper as the number increases.		TINT		0
TINT .................... Adjusts the color balance of the image. The color balance		COLOR		0

	of the image shifts green as the number increases and
	shifts to purple as the number decreases (displays only when the source is selected to
	VIDEO).
	• When the TV50 (PAL, SECAM) signal is inputted, you cannot adjust the TINT.
COLOR	Adjusts the color intensity of the image (displays only when the source is selected to VIDEO).

2INSTALLATION

KEYSTONE ........ Adjusts keystone correction of the image. If the image has				Opt	XGA60
keystone distortion, select the approximate setting. For
	INSTALLATION
normal use, select 0˚.
			KEYSTONE		0˚
AUTO POWER ON ..... To select whether to boot up automatically when the power is
			AUTO POWER		OFF
turned on external to the projector. In this case, the main
			ON
power switch of the projector has to be ON. Set this when the			AUTO POWER		OFF
			OFF
projector is hanging on the ceiling.			SPLASH SCREEN		ON
		ON
• The projector is in stand-by mode when the lamp is not			IMAGE REVERSE		OFF
on. In this case, use the remote control to turn on the
lamp.

AUTO POWER OFF .. Use to select the length of time before projector switches to stand-by when there is no input signal selected source.

SPLASH SCREEN . Use to display the splash screen on the screen when the power is turned ON.

IMAGE REVERSE Use to reverse or invert the projected image. MIRROR is used to rear projection. MIRROR, INVERT is for rear projection ceiling mount.

3FEATURE

MENU POSITION . Use to select the position where the menu is displayed,						Opt		XGA60
(upper left) or (lower right).
EXPAND MODE Selects the mode of enlarging screen. See page 21.		FEATURE
FRAME POSI. .... Sets the position of sub screen. See page 21.					MENU POSITION			1.
AUDIO MODE ....... Select COMPUTER to output the sound which is inputted
			A		EXPAND MODE			1.
				A
to audio input terminal only when the source is selected to			A		FRAME POSI.			3.
				A
COMPUTER. Select VIDEO to output the sound which is					AUDIO MODE			VIDEO
inputted to audio input terminal only when the source is		?			VIDEO SIGNAL			AUTO
selected to VIDEO. Select C/V (COMPUTER/VIDEO
					ANAMORPHIC			OFF
mode) to output the sound which is inputted to audio input					LANGUAGE			English
			A Ë
terminal at all time.					RESET ALL			OK
VIDEO SIGNAL . When AUTO is set, the appropriate video format is
automatically selected according to the input signal. If the image does not appear correctly,
select the desired video format manually.
ANAMORPHIC ... Set ON when displaying DVD discs which are recorded in letter boxed images.
LANGUAGE ....... Use to select the language for the projector display such as menu. (							/ English / Español
/ Deutsch / Français / Italiano /	)

RESET ALL ........ Use to reset the MENU setting (except LANGUAGE).

EN – 16