Mitsubishi Electronics XD470U Feature, Signal, SIGNAL - USER No need to adjust in normal use

3 FEATURE

......................................MENU POSITION	Use to select the position of the menu on the screen, 1.						opt.	XGA60
		(upper left) or 2.	(lower right).
.........................................CINEMA MODE	When AUTO is selected, the film mode will be automati-			FEATURE
	cally activated when a film source signal is inputted.					MENU POSITION		1.
	When OFF is selected, the film mode will not be acti-					CINEMA MODE		AUTO
	vated.
VIDEO SIGNAL	When AUTO is selected, the appropriate video format is			?		VIDEO SIGNAL		AUTO
						ANAMORPHIC		OFF
	automatically selected depending on the input signal. If
	the image isn’t displayed correctly, select the desired				WXGA	WXGA		OFF
	video format manually.					PASSWORD		MENU
						FUNCTION		ACCESS
ANAMORPHIC	Select ON when playing DVD discs containing data of					LANGUAGE		English
					A Ë
	widescreen images.					RESET ALL		OK
........................................................WXGA	See "Specifications" for details of the signal types that
	you can project correctly.
	Select OFF when the signal is 1280 x 800. (note ; Factory Preset is "OFF")

Select the image size corresponding to the input signal when the input signal is 1280x768, 1360x768, or 1366x768

NOTE:

•Make sure the image size of the input signal from "Display Property" of your computer.

•It takes approx. 8 to 10 seconds to change the settings. You cannot change the settings during that time.

PASSWORD FUNCTION	Use to change the mode of the password lock or to enable or cancel the password lock. See page 21
	for details.
LANGUAGE	Use to select the language used in the menu. (				/ English / Español / Deutsch / Français / Ital-
	iano /	/	/	/ PORTUGUÊS).
RESET ALL	Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).

•CINEMA MODE can be adjusted only when a TV50, TV60, 480i, 576i signal is being displayed.

•When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depend- ing on the input signal in such cases.

4 SIGNAL
HORIZ. POSITION	Use to adjust the horizontal position of the image.	opt.
			XGA60
VERT. POSITION	Use to adjust the vertical position of the image.
FINE SYNC	Use to synchronize the projector with the PC input signal	SIGNAL
	so that the image is not blurred.	HORIZ. POSITION	0
TRACKING	Use to eliminate image noise such as wide stripes.	VERT. POSITION	0
COMPUTER INPUT	The projector adjusts its settings automatically when
		FINE SYNC.	0
	connected to a DVD player equipped with a component
		TRACKING	0
	video output (Y, CB, CR). When the projector is con-
		COMPUTER
			RGB
	nected with a device having an RGB terminal, choose	RRGGBB INPUT
	RGB manually.	SET UP	7.5%
SET UP	When OFF is selected, the black area becomes make	HOLD	ON
	lighter. When 3.75% or 7.5% is selected, the black area	USER	OK
	becomes thicker.
HOLD	Use to adjust the image when flagging occurs near the top of the screen.

5 SIGNAL - USER (No need to adjust in normal use.)

CLAMP POSITION/
		USER
CLAMP WIDTH	Use to correct solid white or solid black in the projected	CLAMP
			0
		POSITION
	image.
		CLAMP WIDTH	1

Important:

•You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.

ENGLISH

EN-17